target/linux/mediatek/image/filogic.mk

   1 DTS_DIR := $(DTS_DIR)/mediatek
   2
   3 define Image/Prepare
   4         # For UBI we want only one extra block
   5         rm -f $(KDIR)/ubi_mark
   6         echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
   7 endef
   8
   9 define Build/mt7981-bl2
  10         cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
  11 endef
  12
  13 define Build/mt7981-bl31-uboot
  14         cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
  15 endef
  16
  17 define Build/mt7986-bl2
  18         cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
  19 endef
  20
  21 define Build/mt7986-bl31-uboot
  22         cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
  23 endef
  24
  25 define Build/mt7988-bl2
  26         cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
  27 endef
  28
  29 define Build/mt7988-bl31-uboot
  30         cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
  31 endef
  32
  33 define Build/mt798x-gpt
  34         cp $@ $@.tmp 2>/dev/null || true
  35         ptgen -g -o $@.tmp -a 1 -l 1024 \
  36                 $(if $(findstring sdmmc,$1), \
  37                         -H \
  38                         -t 0x83 -N bl2          -r      -p 4079k@17k \
  39                 ) \
  40                         -t 0x83 -N ubootenv     -r      -p 512k@4M \
  41                         -t 0x83 -N factory      -r      -p 2M@4608k \
  42                         -t 0xef -N fip          -r      -p 4M@6656k \
  43                                 -N recovery     -r      -p 32M@12M \
  44                 $(if $(findstring sdmmc,$1), \
  45                                 -N install      -r      -p 20M@44M \
  46                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
  47                 ) \
  48                 $(if $(findstring emmc,$1), \
  49                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
  50                 )
  51         cat $@.tmp >> $@
  52         rm $@.tmp
  53 endef
  54
  55 metadata_gl_json = \
  56         '{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
  57                 "metadata_version": "1.1", \
  58                 "compat_version": "$(call json_quote,$(compat_version))", \
  59                 $(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
  60                 $(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
  61                         [$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
  62                         "supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
  63                 $(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
  64                 "version": { \
  65                         "release": "$(call json_quote,$(VERSION_NUMBER))", \
  66                         "date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
  67                         "dist": "$(call json_quote,$(VERSION_DIST))", \
  68                         "version": "$(call json_quote,$(VERSION_NUMBER))", \
  69                         "revision": "$(call json_quote,$(REVISION))", \
  70                         "target": "$(call json_quote,$(TARGETID))", \
  71                         "board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
  72                 } \
  73         }'
  74
  75 define Build/append-gl-metadata
  76         $(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
  77         sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
  78         [ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
  79                 cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
  80                 usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
  81                 ucert -A -c "$@.ucert" -x "$@.sig" ;\
  82                 fwtool -S "$@.ucert" "$@" ;\
  83         }
  84 endef
  85
  86 define Build/zyxel-nwa-fit-filogic
  87         $(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
  88                 $@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
  89         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  90         @mv $@.new $@
  91 endef
  92
  93 define Build/cetron-header
  94         $(eval magic=$(word 1,$(1)))
  95         $(eval model=$(word 2,$(1)))
  96         ( \
  97                 dd if=/dev/zero bs=856 count=1 2>/dev/null; \
  98                 printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
  99                 md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
 100                 printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
 101                 cat $@; \
 102         ) > $@.tmp
 103         fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
 104         printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
 105         rm $@.tmp
 106 endef
 107
 108 define Device/asus_tuf-ax4200
 109   DEVICE_VENDOR := ASUS
 110   DEVICE_MODEL := TUF-AX4200
 111   DEVICE_DTS := mt7986a-asus-tuf-ax4200
 112   DEVICE_DTS_DIR := ../dts
 113   DEVICE_DTS_LOADADDR := 0x47000000
 114   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 115   IMAGES := sysupgrade.bin
 116   KERNEL := kernel-bin | lzma | \
 117         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 118   KERNEL_INITRAMFS := kernel-bin | lzma | \
 119         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 120   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 121 endef
 122 TARGET_DEVICES += asus_tuf-ax4200
 123
 124 define Device/acer_predator-w6
 125   DEVICE_VENDOR := Acer
 126   DEVICE_MODEL := Predator W6
 127   DEVICE_DTS := mt7986a-acer-predator-w6
 128   DEVICE_DTS_DIR := ../dts
 129   DEVICE_DTS_LOADADDR := 0x47000000
 130   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
 131   IMAGES := sysupgrade.bin
 132   KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 133   KERNEL_INITRAMFS := kernel-bin | lzma | \
 134         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 135   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 136 endef
 137 TARGET_DEVICES += acer_predator-w6
 138
 139 define Device/bananapi_bpi-r3
 140   DEVICE_VENDOR := Bananapi
 141   DEVICE_MODEL := BPi-R3
 142   DEVICE_DTS := mt7986a-bananapi-bpi-r3
 143   DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
 144   DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
 145   DEVICE_DTS_DIR := $(DTS_DIR)/
 146   DEVICE_DTS_LOADADDR := 0x43f00000
 147   DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
 148   IMAGES := sysupgrade.itb
 149   KERNEL_LOADADDR := 0x44000000
 150   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 151   ARTIFACTS := \
 152                emmc-preloader.bin emmc-bl31-uboot.fip \
 153                nor-preloader.bin nor-bl31-uboot.fip \
 154                sdcard.img.gz \
 155                snand-preloader.bin snand-bl31-uboot.fip
 156   ARTIFACT/emmc-preloader.bin   := mt7986-bl2 emmc-ddr4
 157   ARTIFACT/emmc-bl31-uboot.fip  := mt7986-bl31-uboot bananapi_bpi-r3-emmc
 158   ARTIFACT/nor-preloader.bin    := mt7986-bl2 nor-ddr4
 159   ARTIFACT/nor-bl31-uboot.fip   := mt7986-bl31-uboot bananapi_bpi-r3-nor
 160   ARTIFACT/snand-preloader.bin  := mt7986-bl2 spim-nand-ddr4
 161   ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
 162   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 163                                    pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
 164                                    pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
 165                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 166                                    pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
 167                                 ) \
 168                                    pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
 169                                    pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
 170                                    pad-to 49M | mt7986-bl2 nor-ddr4 |\
 171                                    pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
 172                                    pad-to 51M | mt7986-bl2 emmc-ddr4 |\
 173                                    pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
 174                                    pad-to 56M | mt798x-gpt emmc |\
 175                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 176                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 177                                 ) \
 178                                   gzip
 179   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 180   KERNEL                        := kernel-bin | gzip
 181   KERNEL_INITRAMFS := kernel-bin | lzma | \
 182         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 183   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
 184   DEVICE_DTC_FLAGS := --pad 4096
 185   DEVICE_COMPAT_VERSION := 1.1
 186   DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
 187 endef
 188 TARGET_DEVICES += bananapi_bpi-r3
 189
 190 define Device/cetron_ct3003
 191   DEVICE_VENDOR := Cetron
 192   DEVICE_MODEL := CT3003
 193   DEVICE_DTS := mt7981b-cetron-ct3003
 194   DEVICE_DTS_DIR := ../dts
 195   SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
 196   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 197   UBINIZE_OPTS := -E 5
 198   BLOCKSIZE := 128k
 199   PAGESIZE := 2048
 200   KERNEL_IN_UBI := 1
 201   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 202   IMAGES += factory.bin
 203   IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
 204 endef
 205 TARGET_DEVICES += cetron_ct3003
 206
 207 define Device/cudy_wr3000-v1
 208   DEVICE_VENDOR := Cudy
 209   DEVICE_MODEL := WR3000
 210   DEVICE_VARIANT := v1
 211   DEVICE_DTS := mt7981b-cudy-wr3000-v1
 212   DEVICE_DTS_DIR := ../dts
 213   DEVICE_DTS_LOADADDR := 0x47000000
 214   IMAGES := sysupgrade.bin
 215   IMAGE_SIZE := 15424k
 216   SUPPORTED_DEVICES += R31
 217   KERNEL := kernel-bin | lzma | \
 218         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 219   KERNEL_INITRAMFS := kernel-bin | lzma | \
 220         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 221   IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
 222   DEVICE_PACKAGES := kmod-mt7981-firmware
 223 endef
 224 TARGET_DEVICES += cudy_wr3000-v1
 225
 226 define Device/glinet_gl-mt3000
 227   DEVICE_VENDOR := GL.iNet
 228   DEVICE_MODEL := GL-MT3000
 229   DEVICE_DTS := mt7981b-glinet-gl-mt3000
 230   DEVICE_DTS_DIR := ../dts
 231   SUPPORTED_DEVICES += glinet,mt3000-snand
 232   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
 233   UBINIZE_OPTS := -E 5
 234   BLOCKSIZE := 128k
 235   PAGESIZE := 2048
 236   IMAGE_SIZE := 246272k
 237   KERNEL_IN_UBI := 1
 238   IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
 239 endef
 240 TARGET_DEVICES += glinet_gl-mt3000
 241
 242 define Device/h3c_magic-nx30-pro
 243   DEVICE_VENDOR := H3C
 244   DEVICE_MODEL := Magic NX30 Pro
 245   DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
 246   DEVICE_DTS_DIR := ../dts
 247   UBINIZE_OPTS := -E 5
 248   BLOCKSIZE := 128k
 249   PAGESIZE := 2048
 250   KERNEL_IN_UBI := 1
 251   UBOOTENV_IN_UBI := 1
 252   IMAGE_SIZE := 65536k
 253   IMAGES := sysupgrade.itb
 254   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 255   KERNEL := kernel-bin | gzip
 256   KERNEL_INITRAMFS := kernel-bin | lzma | \
 257         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 258   IMAGE/sysupgrade.itb := append-kernel | \
 259         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 260   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 261   ARTIFACTS := preloader.bin bl31-uboot.fip
 262   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 263   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
 264 endef
 265 TARGET_DEVICES += h3c_magic-nx30-pro
 266
 267 define Device/netgear_wax220
 268   DEVICE_VENDOR := NETGEAR
 269   DEVICE_MODEL := WAX220
 270   DEVICE_DTS := mt7986b-netgear-wax220
 271   DEVICE_DTS_DIR := ../dts
 272   NETGEAR_ENC_MODEL := WAX220
 273   NETGEAR_ENC_REGION := US
 274   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 275   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 276   IMAGE_SIZE := 32768k
 277   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 278   IMAGES += factory.img
 279   # Padding to 10M seems to be required by OEM web interface
 280   IMAGE/factory.img := sysupgrade-tar | \
 281           pad-to 10M | check-size | netgear-encrypted-factory
 282 endef
 283 TARGET_DEVICES += netgear_wax220
 284
 285 define Device/mediatek_mt7986a-rfb-nand
 286   DEVICE_VENDOR := MediaTek
 287   DEVICE_MODEL := MT7986 rfba AP (NAND)
 288   DEVICE_DTS := mt7986a-rfb-spim-nand
 289   DEVICE_DTS_DIR := $(DTS_DIR)/
 290   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 291   SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
 292   UBINIZE_OPTS := -E 5
 293   BLOCKSIZE := 128k
 294   PAGESIZE := 2048
 295   IMAGE_SIZE := 65536k
 296   KERNEL_IN_UBI := 1
 297   IMAGES += factory.bin
 298   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 299   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 300   KERNEL = kernel-bin | lzma | \
 301         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 302   KERNEL_INITRAMFS = kernel-bin | lzma | \
 303         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
 304 endef
 305 TARGET_DEVICES += mediatek_mt7986a-rfb-nand
 306
 307 define Device/mediatek_mt7986b-rfb
 308   DEVICE_VENDOR := MediaTek
 309   DEVICE_MODEL := MTK7986 rfbb AP
 310   DEVICE_DTS := mt7986b-rfb
 311   DEVICE_DTS_DIR := $(DTS_DIR)/
 312   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 313   SUPPORTED_DEVICES := mediatek,mt7986b-rfb
 314   UBINIZE_OPTS := -E 5
 315   BLOCKSIZE := 128k
 316   PAGESIZE := 2048
 317   IMAGE_SIZE := 65536k
 318   KERNEL_IN_UBI := 1
 319   IMAGES += factory.bin
 320   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 321   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 322 endef
 323 TARGET_DEVICES += mediatek_mt7986b-rfb
 324
 325 define Device/mediatek_mt7988a-rfb
 326   DEVICE_VENDOR := MediaTek
 327   DEVICE_MODEL := MT7988A rfb
 328   DEVICE_DTS := mt7988a-rfb
 329   DEVICE_DTS_OVERLAY:= \
 330         mt7988a-rfb-emmc \
 331         mt7988a-rfb-sd \
 332         mt7988a-rfb-snfi-nand \
 333         mt7988a-rfb-spim-nand \
 334         mt7988a-rfb-spim-nor \
 335         mt7988a-rfb-eth1-aqr \
 336         mt7988a-rfb-eth1-i2p5g-phy \
 337         mt7988a-rfb-eth1-mxl \
 338         mt7988a-rfb-eth1-sfp \
 339         mt7988a-rfb-eth2-aqr \
 340         mt7988a-rfb-eth2-mxl \
 341         mt7988a-rfb-eth2-sfp
 342   DEVICE_DTS_DIR := $(DTS_DIR)/
 343   DEVICE_DTC_FLAGS := --pad 4096
 344   DEVICE_DTS_LOADADDR := 0x45f00000
 345   DEVICE_PACKAGES := kmod-sfp
 346   KERNEL_LOADADDR := 0x46000000
 347   KERNEL := kernel-bin | gzip
 348   KERNEL_INITRAMFS := kernel-bin | lzma | \
 349         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 350   KERNEL_INITRAMFS_SUFFIX := .itb
 351   KERNEL_IN_UBI := 1
 352   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 353   IMAGES := sysupgrade.itb
 354   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
 355   ARTIFACTS := \
 356                emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
 357                nor-preloader.bin nor-bl31-uboot.fip \
 358                sdcard.img.gz \
 359                snand-preloader.bin snand-bl31-uboot.fip
 360   ARTIFACT/emmc-gpt.bin         := mt798x-gpt emmc
 361   ARTIFACT/emmc-preloader.bin   := mt7988-bl2 emmc-comb
 362   ARTIFACT/emmc-bl31-uboot.fip  := mt7988-bl31-uboot rfb-emmc
 363   ARTIFACT/nor-preloader.bin    := mt7988-bl2 nor-comb
 364   ARTIFACT/nor-bl31-uboot.fip   := mt7988-bl31-uboot rfb-nor
 365   ARTIFACT/snand-preloader.bin  := mt7988-bl2 spim-nand-comb
 366   ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
 367   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 368                                    pad-to 17k | mt7988-bl2 sdmmc-comb |\
 369                                    pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
 370                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 371                                    pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
 372                                 ) \
 373                                    pad-to 44M | mt7988-bl2 spim-nand-comb |\
 374                                    pad-to 45M | mt7988-bl31-uboot rfb-snand |\
 375                                    pad-to 51M | mt7988-bl2 nor-comb |\
 376                                    pad-to 51M | mt7988-bl31-uboot rfb-nor |\
 377                                    pad-to 55M | mt7988-bl2 emmc-comb |\
 378                                    pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
 379                                    pad-to 62M | mt798x-gpt emmc |\
 380                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 381                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 382                                 ) \
 383                                   gzip
 384 endef
 385 TARGET_DEVICES += mediatek_mt7988a-rfb
 386
 387 define Device/mercusys_mr90x-v1
 388   DEVICE_VENDOR := Mercusys
 389   DEVICE_MODEL := MR90X v1
 390   DEVICE_DTS := mt7986b-mercusys-mr90x-v1
 391   DEVICE_DTS_DIR := ../dts
 392   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 393   UBINIZE_OPTS := -E 5
 394   BLOCKSIZE := 128k
 395   PAGESIZE := 2048
 396   IMAGE_SIZE := 51200k
 397   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 398 endef
 399 TARGET_DEVICES += mercusys_mr90x-v1
 400
 401 define Device/qihoo_360t7
 402   DEVICE_VENDOR := Qihoo
 403   DEVICE_MODEL := 360T7
 404   DEVICE_DTS := mt7981b-qihoo-360t7
 405   DEVICE_DTS_DIR := ../dts
 406   UBINIZE_OPTS := -E 5
 407   BLOCKSIZE := 128k
 408   PAGESIZE := 2048
 409   KERNEL_IN_UBI := 1
 410   UBOOTENV_IN_UBI := 1
 411   IMAGES := sysupgrade.itb
 412   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 413   KERNEL := kernel-bin | gzip
 414   KERNEL_INITRAMFS := kernel-bin | lzma | \
 415         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 416   IMAGE/sysupgrade.itb := append-kernel | \
 417         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 418   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 419   ARTIFACTS := preloader.bin bl31-uboot.fip
 420   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 421   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
 422 endef
 423 TARGET_DEVICES += qihoo_360t7
 424
 425 define Device/tplink_tl-xdr-common
 426   DEVICE_VENDOR := TP-Link
 427   DEVICE_DTS_DIR := ../dts
 428   UBINIZE_OPTS := -E 5
 429   BLOCKSIZE := 128k
 430   PAGESIZE := 2048
 431   KERNEL_IN_UBI := 1
 432   UBOOTENV_IN_UBI := 1
 433   IMAGES := sysupgrade.itb
 434   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 435   KERNEL := kernel-bin | gzip
 436   KERNEL_INITRAMFS := kernel-bin | lzma | \
 437         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 438   IMAGE/sysupgrade.itb := append-kernel | \
 439         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
 440   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 441   ARTIFACTS := preloader.bin bl31-uboot.fip
 442   ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
 443 endef
 444
 445 define Device/tplink_tl-xdr4288
 446   DEVICE_MODEL := TL-XDR4288
 447   DEVICE_DTS := mt7986a-tplink-tl-xdr4288
 448   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
 449   $(call Device/tplink_tl-xdr-common)
 450 endef
 451 TARGET_DEVICES += tplink_tl-xdr4288
 452
 453 define Device/tplink_tl-xdr6086
 454   DEVICE_MODEL := TL-XDR6086
 455   DEVICE_DTS := mt7986a-tplink-tl-xdr6086
 456   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
 457   $(call Device/tplink_tl-xdr-common)
 458 endef
 459 TARGET_DEVICES += tplink_tl-xdr6086
 460
 461 define Device/tplink_tl-xdr6088
 462   DEVICE_MODEL := TL-XDR6088
 463   DEVICE_DTS := mt7986a-tplink-tl-xdr6088
 464   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
 465   $(call Device/tplink_tl-xdr-common)
 466 endef
 467 TARGET_DEVICES += tplink_tl-xdr6088
 468
 469 define Device/xiaomi_mi-router-wr30u-112m-nmbm
 470   DEVICE_VENDOR := Xiaomi
 471   DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
 472   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
 473   DEVICE_DTS_DIR := ../dts
 474   UBINIZE_OPTS := -E 5
 475   BLOCKSIZE := 128k
 476   PAGESIZE := 2048
 477   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 478 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 479   ARTIFACTS := initramfs-factory.ubi
 480   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 481 endif
 482   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 483 endef
 484 TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
 485
 486 define Device/xiaomi_mi-router-wr30u-stock
 487   DEVICE_VENDOR := Xiaomi
 488   DEVICE_MODEL := Mi Router WR30U (stock layout)
 489   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
 490   DEVICE_DTS_DIR := ../dts
 491   UBINIZE_OPTS := -E 5
 492   BLOCKSIZE := 128k
 493   PAGESIZE := 2048
 494   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 495 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 496   ARTIFACTS := initramfs-factory.ubi
 497   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 498 endif
 499   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 500 endef
 501 TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
 502
 503 define Device/xiaomi_mi-router-wr30u-ubootmod
 504   DEVICE_VENDOR := Xiaomi
 505   DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
 506   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
 507   DEVICE_DTS_DIR := ../dts
 508   UBINIZE_OPTS := -E 5
 509   BLOCKSIZE := 128k
 510   PAGESIZE := 2048
 511   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 512   KERNEL_IN_UBI := 1
 513   UBOOTENV_IN_UBI := 1
 514   IMAGES := sysupgrade.itb
 515   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 516   KERNEL := kernel-bin | gzip
 517   KERNEL_INITRAMFS := kernel-bin | lzma | \
 518         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 519   IMAGE/sysupgrade.itb := append-kernel | \
 520         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 521   ARTIFACTS := preloader.bin bl31-uboot.fip
 522   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 523   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
 524 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 525   ARTIFACTS += initramfs-factory.ubi
 526   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
 527 endif
 528 endef
 529 TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
 530
 531 define Device/xiaomi_redmi-router-ax6000-stock
 532   DEVICE_VENDOR := Xiaomi
 533   DEVICE_MODEL := Redmi Router AX6000 (stock layout)
 534   DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
 535   DEVICE_DTS_DIR := ../dts
 536   DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
 537   UBINIZE_OPTS := -E 5
 538   BLOCKSIZE := 128k
 539   PAGESIZE := 2048
 540 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 541   ARTIFACTS := initramfs-factory.ubi
 542   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 543 endif
 544   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 545 endef
 546 TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
 547
 548 define Device/xiaomi_redmi-router-ax6000-ubootmod
 549   DEVICE_VENDOR := Xiaomi
 550   DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
 551   DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
 552   DEVICE_DTS_DIR := ../dts
 553   DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
 554   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 555   IMAGES := sysupgrade.itb
 556   UBINIZE_OPTS := -E 5
 557   BLOCKSIZE := 128k
 558   PAGESIZE := 2048
 559   KERNEL_IN_UBI := 1
 560   UBOOTENV_IN_UBI := 1
 561   KERNEL := kernel-bin | gzip
 562   KERNEL_INITRAMFS := kernel-bin | lzma | \
 563         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 564   IMAGE/sysupgrade.itb := append-kernel | \
 565         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 566   ARTIFACTS := preloader.bin bl31-uboot.fip
 567   ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
 568   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
 569 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 570   ARTIFACTS += initramfs-factory.ubi
 571   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
 572 endif
 573 endef
 574 TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
 575
 576 define Device/zyxel_ex5601-t0-stock
 577   DEVICE_VENDOR := Zyxel
 578   DEVICE_MODEL := EX5601-T0  (stock layout)
 579   DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
 580   DEVICE_DTS_DIR := ../dts
 581   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 582   SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
 583   UBINIZE_OPTS := -E 5
 584   BLOCKSIZE := 256k
 585   PAGESIZE := 4096
 586   IMAGE_SIZE := 65536k
 587   KERNEL_IN_UBI := 1
 588   IMAGES += factory.bin
 589   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 590   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 591   KERNEL = kernel-bin | lzma | \
 592         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 593   KERNEL_INITRAMFS = kernel-bin | lzma | \
 594         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
 595 endef
 596 TARGET_DEVICES += zyxel_ex5601-t0-stock
 597
 598 define Device/zyxel_ex5700-telenor
 599   DEVICE_VENDOR := ZyXEL
 600   DEVICE_MODEL := EX5700 (Telenor)
 601   DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
 602   DEVICE_DTS_DIR := ../dts
 603   DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 604   UBINIZE_OPTS := -E 5
 605   BLOCKSIZE := 128k
 606   PAGESIZE := 2048
 607   IMAGE_SIZE := 65536k
 608   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 609 endef
 610 TARGET_DEVICES += zyxel_ex5700-telenor
 611
 612 define Device/zyxel_nwa50ax-pro
 613   DEVICE_VENDOR := ZyXEL
 614   DEVICE_MODEL := NWA50AX Pro
 615   DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
 616   DEVICE_DTS_DIR := ../dts
 617   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
 618   DEVICE_DTS_LOADADDR := 0x44000000
 619   UBINIZE_OPTS := -E 5
 620   BLOCKSIZE := 128k
 621   PAGESIZE := 2048
 622   IMAGE_SIZE := 51200k
 623   KERNEL_IN_UBI := 1
 624   IMAGES += factory.bin
 625   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
 626   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 627 endef
 628 TARGET_DEVICES += zyxel_nwa50ax-pro