1 // SPDX-License-Identifier: GPL-2.0-or-later or MIT
3 /include/ "fsl/p1020si-pre.dtsi"
5 model = "Enterasys WS-AP3710i";
6 compatible = "enterasys,ws-ap3710i";
9 led-boot = &led_power_green;
10 led-failsafe = &led_power_red;
11 led-running = &led_power_green;
12 led-upgrade = &led_power_red;
13 label-mac-device = &enet0;
17 device_type = "memory";
21 compatible = "gpio-leds";
25 label = "ws-ap3710i:green:radio1";
26 linux,default-trigger = "phy0tpt";
31 label = "ws-ap3710i:green:radio2";
32 linux,default-trigger = "phy1tpt";
35 led_power_green: power_green {
37 label = "ws-ap3710i:green:power";
40 led_power_red: power_red {
42 label = "ws-ap3710i:red:power";
47 compatible = "gpio-keys";
50 label = "Reset button";
51 gpios = <&gpio0 1 1>; /* active low */
52 linux,code = <0x198>; /* KEY_RESTART */
56 lbc: localbus@ffe05000 {
57 reg = <0 0xffe05000 0 0x1000>;
58 ranges = <0x0 0x0 0x0 0xee000000 0x2000000>;
63 compatible = "cfi-flash";
64 reg = <0x0 0x0 0x2000000>;
69 compatible = "fixed-partitions";
74 compatible = "denx,fit";
75 reg = <0x0 0x1d80000>;
80 reg = <0x1d80000 0x80000>;
86 reg = <0x1e00000 0x100000>;
92 reg = <0x1f00000 0x20000>;
98 reg = <0x1f20000 0x20000>;
107 ranges = <0x0 0x0 0xffe00000 0x100000>;
109 gpio0: gpio-controller@fc00 {
113 phy4: ethernet-phy@4 {
115 reset-gpios = <&gpio0 2 1>;
119 enet0: ethernet@b0000 {
120 phy-connection-type = "rgmii-id";
121 phy-handle = <&phy4>;
124 enet1: ethernet@b1000 {
128 enet2: ethernet@b2000 {
141 pci0: pcie@ffe09000 {
142 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
143 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
144 reg = <0 0xffe09000 0 0x1000>;
146 ranges = <0x2000000 0x0 0xa0000000
147 0x2000000 0x0 0xa0000000
156 pci1: pcie@ffe0a000 {
157 reg = <0 0xffe0a000 0 0x1000>;
158 ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
159 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
161 ranges = <0x2000000 0x0 0x80000000
162 0x2000000 0x0 0x80000000
172 /include/ "fsl/p1020si-post.dtsi"