1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
4 #include <dt-bindings/gpio/gpio.h>
5 #include "armada-372x.dtsi"
8 model = "GL.iNet GL-MV1000";
9 compatible = "glinet,gl-mv1000", "marvell,armada3720";
12 stdout-path = "serial0:115200n8";
16 device_type = "memory";
17 reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
20 vcc_sd_reg1: regulator {
21 compatible = "regulator-gpio";
22 regulator-name = "vcc_sd1";
23 regulator-min-microvolt = <1800000>;
24 regulator-max-microvolt = <3300000>;
39 compatible = "jedec,spi-nor";
40 spi-max-frequency = <104000000>;
43 compatible = "fixed-partitions";
54 reg = <0Xf0000 0x8000>;
57 factory: partition@f8000 {
59 reg = <0xf8000 0x8000>;
68 cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
69 marvell,pad-type = "sd";
71 vqmmc-supply = <&vcc_sd_reg1>;
82 marvell,pad-type = "fixed-1-8v";
100 compatible = "marvell,mv88e6085";
101 #address-cells = <1>;
108 #address-cells = <1>;
120 phy-handle = <&switch0phy0>;
126 phy-handle = <&switch0phy1>;
132 phy-handle = <&switch0phy2>;
137 #address-cells = <1>;
140 switch0phy0: switch0phy0@11 {
143 switch0phy1: switch0phy1@12 {
146 switch0phy2: switch0phy2@13 {
154 mtd-mac-address = <&factory 0x0>;
155 phy-mode = "rgmii-id";