1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 #include "armada-3720-uDPU.dtsi"
8 model = "Methode eDPU Board";
9 compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
12 /* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of
13 * 2500Base-X since until 5.15 support for mvebu is available trying to
14 * use 2500Base-X will cause buffer overruns for which the fix is not
15 * easily backportable.
18 phy-mode = "1000base-x";
22 * External MV88E6361 switch is only available on v2 of the board.
23 * U-Boot will enable the MDIO bus and switch nodes.
27 pinctrl-names = "default";
28 pinctrl-0 = <&smi_pins>;
30 /* Actual device is MV88E6361 */
32 compatible = "marvell,mv88e6190";
45 phy-mode = "2500base-x";
46 managed = "in-band-status";
53 phy-mode = "2500base-x";
54 managed = "in-band-status";
60 phy-mode = "2500base-x";
61 managed = "in-band-status";