target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wax630.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 /dts-v1/;
   4
   5 #include "ipq8074.dtsi"
   6 #include "ipq8074-hk-cpu.dtsi"
   7 #include "ipq8074-ess.dtsi"
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/leds/common.h>
  11
  12 / {
  13         model = "Netgear WAX630";
  14         compatible = "netgear,wax630", "qcom,ipq8074";
  15
  16         aliases {
  17                 serial0 = &blsp1_uart5;
  18
  19                 ethernet0 = &dp6_syn;
  20                 ethernet1 = &dp4;
  21                 label-mac-device = &dp6_syn;
  22
  23                 led-boot = &led_system_blue;
  24                 led-failsafe = &led_system_red;
  25                 led-running = &led_system_green;
  26                 led-upgrade = &led_system_blue;
  27         };
  28
  29         chosen {
  30                 stdout-path = "serial0:115200n8";
  31                 bootargs-append = " root=/dev/ubiblock0_1";
  32         };
  33
  34         keys {
  35                 compatible = "gpio-keys";
  36
  37                 reset {
  38                         label = "reset";
  39                         gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_RESTART>;
  41                 };
  42         };
  43
  44         led-spi {
  45                 compatible = "spi-gpio";
  46                 #address-cells = <1>;
  47                 #size-cells = <0>;
  48
  49                 sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
  50                 mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
  51
  52                 led_gpio: led-gpio@0 {
  53                         compatible = "fairchild,74hc595";
  54                         reg = <0>;
  55                         gpio-controller;
  56                         #gpio-cells = <2>;
  57                         registers-number = <1>;
  58                         enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
  59                         spi-max-frequency = <1000000>;
  60                 };
  61         };
  62
  63         leds {
  64                 compatible = "gpio-leds";
  65
  66                 led_system_red: system-red {
  67                         label = "system:red";
  68                         gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
  69                         default-state = "off";
  70                 };
  71
  72                 led_system_green: system-green {
  73                         label = "system:green";
  74                         gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
  75                         default-state = "off";
  76                 };
  77
  78                 led_system_blue: system-blue {
  79                         label = "system:blue";
  80                         gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
  81                         default-state = "off";
  82                 };
  83
  84                 lan1-green {
  85                         label = "lan1:green";
  86                         gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
  87                         default-state = "off";
  88                 };
  89
  90                 lan1-orange {
  91                         label = "lan1:orange";
  92                         gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
  93                         default-state = "off";
  94                 };
  95
  96                 lan2-green {
  97                         label = "lan2:green";
  98                         gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
  99                         default-state = "off";
 100                 };
 101
 102                 lan2-orange {
 103                         label = "lan2:orange";
 104                         gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
 105                         default-state = "off";
 106                 };
 107
 108                 2g-blue {
 109                         label = "wlan2g:blue";
 110                         gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
 111                         default-state = "off";
 112                 };
 113
 114                 2g-green {
 115                         label = "wlan2g:green";
 116                         gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
 117                         default-state = "off";
 118                 };
 119
 120                 5g-low-blue {
 121                         label = "wlan5g_low:blue";
 122                         gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
 123                         default-state = "off";
 124                 };
 125
 126                 5g-low-green {
 127                         label = "wlan5g_low:green";
 128                         gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
 129                         default-state = "off";
 130                 };
 131
 132                 5g-high-blue {
 133                         label = "wlan5g_high:blue";
 134                         gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
 135                         default-state = "off";
 136                 };
 137
 138                 5g-high-green {
 139                         label = "wlan5g_high:green";
 140                         gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 141                         default-state = "off";
 142                 };
 143
 144         };
 145 };
 146
 147 &edma {
 148         status = "okay";
 149 };
 150
 151 &switch {
 152         status = "okay";
 153
 154         switch_lan_bmp = <ESS_PORT4>;
 155         switch_wan_bmp = <ESS_PORT6>;
 156         switch_mac_mode = <0x00>;
 157         switch_mac_mode1 = <0xff>;
 158         switch_mac_mode2 = <0x0d>;
 159         bm_tick_mode = <0x00>;
 160         tm_tick_mode = <0x00>;
 161
 162         qcom,port_phyinfo {
 163                 port@3 {
 164                         port_id = <4>;
 165                         phy_address = <3>;
 166                 };
 167
 168                 port@5 {
 169                         port_id = <6>;
 170                         phy_address = <28>;
 171                         port_mac_sel = "QGMAC_PORT";
 172                 };
 173         };
 174 };
 175
 176 &tlmm {
 177         mdio_pins: mdio-pins {
 178                 mdc {
 179                         pins = "gpio68";
 180                         function = "mdc";
 181                         drive-strength = <8>;
 182                         bias-pull-up;
 183                 };
 184
 185                 mdio {
 186                         pins = "gpio69";
 187                         function = "mdio";
 188                         drive-strength = <8>;
 189                         bias-pull-up;
 190                 };
 191         };
 192 };
 193
 194 &mdio {
 195         status = "okay";
 196
 197         pinctrl-0 = <&mdio_pins>;
 198         pinctrl-names = "default";
 199         reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 200
 201         qca8075: ethernet-phy@3 {
 202                 compatible = "ethernet-phy-ieee802.3-c22";
 203                 reg = <3>;
 204         };
 205
 206         qca8081: ethernet-phy@28 {
 207                 compatible = "ethernet-phy-id004d.d101";
 208                 reg = <28>;
 209                 reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
 210         };
 211 };
 212
 213 &dp4 {
 214         status = "okay";
 215         phy-handle = <&qca8075>;
 216         label = "lan2";
 217 };
 218
 219 &dp6_syn {
 220         status = "okay";
 221         phy-handle = <&qca8081>;
 222         label = "lan1";
 223 };
 224
 225 &qpic_bam {
 226         status = "okay";
 227 };
 228
 229 &qpic_nand {
 230         status = "okay";
 231
 232         nand@0 {
 233                 reg = <0>;
 234                 nand-ecc-strength = <4>;
 235                 nand-ecc-step-size = <512>;
 236                 nand-bus-width = <8>;
 237
 238                 partitions {
 239                         compatible = "qcom,smem-part";
 240                 };
 241         };
 242 };
 243
 244 &blsp1_uart5 {
 245         status = "okay";
 246 };
 247
 248 &wifi {
 249         status = "okay";
 250
 251         qcom,ath11k-calibration-variant = "Netgear-WAX630";
 252 };