3 #include "TPLINK-8M.dtsi"
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/gpio/gpio.h>
9 compatible = "tplink,c20-v4", "mediatek,mt7628an-soc";
10 model = "TP-Link Archer C20 v4";
13 led-status = &led_power;
17 compatible = "gpio-leds";
20 label = "c20-v4:green:lan";
21 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
25 label = "c20-v4:green:power";
26 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
30 label = "c20-v4:green:wan";
31 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
35 label = "c20-v4:orange:wan";
36 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
40 label = "c20-v4:green:wlan5g";
41 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
45 label = "c20-v4:green:wlan2g";
46 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
50 label = "c20-v4:green:wps";
51 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
56 compatible = "gpio-keys-polled";
61 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
62 linux,code = <KEY_RESTART>;
67 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
68 linux,code = <KEY_RFKILL>;
74 mtd-mac-address-increment = <(-2)>;
78 mediatek,portmap = "wllll";
82 state_default: pinctrl0 {
84 ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
85 ralink,function = "gpio";
96 reg = <0x0000 0 0 0 0>;
97 mediatek,mtd-eeprom = <&factory 0x28000>;
98 ieee80211-freq-limit = <5000000 6000000>;
99 mtd-mac-address = <&factory 0xf100>;
100 mtd-mac-address-increment = <(-1)>;