3 /include/ "rt3883.dtsi"
6 compatible = "BR-6475ND", "ralink,rt3883-soc";
7 model = "Edimax BR-6475nD";
10 state_default: pinctrl0 {
12 ralink,group = "spi", "jtag", "uartf";
13 ralink,function = "gpio";
34 mtd-mac-address = <&devdata 0x0d>;
37 ralink,fixed-link = <1000 1 1 1>;
43 ralink,mtd-eeprom = <&factory 0>;
49 pinctrl-names = "default";
50 pinctrl-0 = <&pci_pins>;
54 ralink,function = "pci-fnc";
63 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
64 reg = < 0x10000 0 0 0 0 >;
65 ralink,eeprom = "rt2x00pci_1_0.eeprom";
80 compatible = "cfi-flash";
81 reg = <0x1c000000 0x800000>;
88 reg = <0x00000000 0x00030000>;
94 reg = <0x00030000 0x00010000>;
99 factory: partition@40000 {
100 reg = <0x00040000 0x00010000>;
105 devdata: partition@50000 {
106 reg = <0x00050000 0x00020000>;
112 reg = <0x00070000 0x00790000>;
117 reg = <0x00270000 0x00590000>;
123 compatible = "realtek,rtl8367";
124 gpio-sda = <&gpio0 5 0>;
125 gpio-sck = <&gpio0 4 0>;
126 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
130 compatible = "gpio-keys-polled";
131 #address-cells = <1>;
133 poll-interval = <100>;
136 gpios = <&gpio0 7 1>;
137 linux,code = <0x198>;
141 gpios = <&gpio0 9 1>;
142 linux,input-type = <5>;
148 compatible = "gpio-leds";
151 label = "edimax:green:power";
152 gpios = <&gpio0 10 1>;
155 label = "edimax:amber:wlan";
156 gpios = <&gpio0 11 1>;
159 label = "edimax:amber:wlan_5ghz";
160 gpios = <&gpio0 14 1>;
164 /* Unclear if this is the correct gpio setup; the USB ports are
165 unpopulated on a stock BR-6475nD, even though the hardware exists
166 and the headers are there. */
169 compatible = "gpio-export";
172 gpio-export,name="usb";
173 gpio-export,output=<0>;
174 gpios = <&gpio0 19 0>;