5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "dlink,dap-1522-a1", "ralink,rt2880-soc";
10 model = "D-Link DAP-1522 A1";
13 led-status = &led_status;
17 compatible = "cfi-flash";
18 reg = <0xbc400000 0x800000>;
30 factory: partition@30000 {
32 reg = <0x30000 0x10000>;
38 reg = <0x40000 0x3a0000>;
43 compatible = "realtek,rtl8366s";
44 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
45 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
49 compatible = "gpio-keys-polled";
52 poll-interval = <100>;
56 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_RESTART>;
62 gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
63 linux,code = <KEY_WPS_BUTTON>;
68 gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
70 linux,input-type = <EV_SW>;
75 gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
77 linux,input-type = <EV_SW>;
82 compatible = "gpio-leds";
85 label = "dap-1522-a1:blue:wps";
86 gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
90 label = "dap-1522-a1:blue:ap";
91 gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
95 label = "dap-1522-a1:red:sta";
96 gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
100 label = "dap-1522-a1:blue:status";
101 gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
115 state_default: pinctrl0 {
117 ralink,group = "i2c", "uartlite", "pci";
118 ralink,function = "gpio";
125 mtd-mac-address = <&factory 0x2004>;
128 mediatek,fixed-link = <1000 1 1 1>;
134 phy0: ethernet-phy@0 {
142 ralink,mtd-eeprom = <&factory 0x2000>;