3 #include "mt7620a.dtsi"
5 #include <dt-bindings/input/input.h>
8 compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
9 model = "D-Link DIR-810L";
12 compatible = "gpio-keys-polled";
31 compatible = "gpio-leds";
34 label = "dir-810l:green:power";
39 label = "dir-810l:orange:wan";
40 gpios = <&gpio0 12 0>;
44 label = "dir-810l:orange:power";
45 gpios = <&gpio0 13 0>;
56 compatible = "jedec,spi-nor";
58 spi-max-frequency = <10000000>;
68 reg = <0x30000 0x10000>;
72 factory: partition@40000 {
74 reg = <0x40000 0x10000>;
78 factory5g: partition@50000 {
80 reg = <0x50000 0x10000>;
85 label = "Wolf_Config";
86 reg = <0x60000 0x10000>;
92 reg = <0x70000 0x80000>;
98 reg = <0xe0000 0x80000>;
104 reg = <0x170000 0x690000>;
110 state_default: pinctrl0 {
112 ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
113 ralink,function = "gpio";
119 mtd-mac-address = <&factory 0x28>;
120 mediatek,portmap = "llllw";
124 mediatek,port4 = "ephy";
125 pinctrl-names = "default";
126 pinctrl-0 = <&ephy_pins>;
134 ralink,mtd-eeprom = <&factory 0>;