5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
12 device_type = "memory";
13 reg = <0x0 0x8000000>;
17 bootargs = "console=ttyS0,57600";
20 palmbus: palmbus@1E000000 {
27 compatible = "gpio-keys-polled";
34 gpios = <&gpio0 18 1>;
35 linux,code = <KEY_RESTART>;
40 compatible = "gpio-leds";
43 label = "ew1200:green:run";
44 gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
48 label = "ew1200:green:usb";
49 gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
64 compatible = "jedec,spi-nor";
66 spi-max-frequency = <10000000>;
67 m25p,chunked-io = <32>;
77 reg = <0x30000 0x10000>;
81 factory: partition@40000 {
83 reg = <0x40000 0x10000>;
89 reg = <0x50000 0xfb0000>;
99 reg = <0x0000 0 0 0 0>;
101 mediatek,mtd-eeprom = <&factory 0x8000>;
102 ieee80211-freq-limit = <5000000 6000000>;
108 reg = <0x0000 0 0 0 0>;
110 mediatek,mtd-eeprom = <&factory 0x0000>;
111 ieee80211-freq-limit = <2400000 2500000>;
117 mtd-mac-address = <&factory 0xe000>;
121 state_default: pinctrl0 {
123 ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
124 ralink,function = "gpio";