5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
11 compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
12 model = "Belkin F5D8235 v1";
15 led-status = &led_wired_blue;
19 compatible = "cfi-flash";
20 reg = <0xbc400000 0x800000>;
34 reg = <0x30000 0x10000>;
38 factory: partition@40000 {
40 reg = <0x40000 0x10000>;
46 reg = <0x50000 0x7b0000>;
51 compatible = "realtek,rtl8366s";
52 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
53 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
94 realtek,green-ethernet-features;
98 compatible = "gpio-keys-polled";
99 poll-interval = <100>;
103 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
104 linux,code = <KEY_WPS_BUTTON>;
109 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
110 linux,code = <KEY_RESTART>;
115 compatible = "gpio-leds";
118 label = "f5d8235-v1:blue:internet";
119 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
123 label = "f5d8235-v1:amber:internet";
124 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
128 label = "f5d8235-v1:blue:modem";
129 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
133 label = "f5d8235-v1:amber:modem";
134 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
138 label = "f5d8235-v1:blue:router";
139 gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
143 label = "f5d8235-v1:blue:storage";
144 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
148 label = "f5d8235-v1:amber:storage";
149 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
153 label = "f5d8235-v1:blue:security";
154 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
158 label = "f5d8235-v1:amber:security";
159 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
162 led_wired_blue: wired {
163 label = "f5d8235-v1:blue:wired";
164 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
168 label = "f5d8235-v1:amber:wired";
169 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
173 label = "f5d8235-v1:blue:wireless";
174 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
178 label = "f5d8235-v1:amber:wireless";
179 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
189 state_default: pinctrl0 {
191 ralink,group = "spi", "i2c", "jtag", "mdio", "uartlite";
192 ralink,function = "gpio";
199 mtd-mac-address = <&factory 0x4>;
202 mediatek,fixed-link = <1000 1 1 1>;
212 ralink,mtd-eeprom = <&factory 0x0>;