ramips: Support for RAMIPS based Tripmate HT-TM02 board
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / HT-TM02.dts
1 /dts-v1/;
2
3 /include/ "rt5350.dtsi"
4
5 / {
6 compatible = "HT-TM02", "ralink,rt5350-soc";
7 model = "HOOTOO HT-TM02";
8
9 palmbus@10000000 {
10
11 gpio0: gpio@600 {
12 status = "okay";
13 };
14
15 spi@b00 {
16 status = "okay";
17 m25p80@0 {
18 #address-cells = <1>;
19 #size-cells = <1>;
20 compatible = "mx25l6405d";
21 reg = <0 0>;
22 linux,modalias = "m25p80", "mx25l6405d";
23 spi-max-frequency = <10000000>;
24
25 partition@0 {
26 label = "u-boot";
27 reg = <0x0 0x30000>;
28 read-only;
29 };
30
31 partition@30000 {
32 label = "u-boot-env";
33 reg = <0x30000 0x10000>;
34 read-only;
35 };
36
37 factory: partition@40000 {
38 label = "factory";
39 reg = <0x40000 0x10000>;
40 read-only;
41 };
42
43 partition@50000 {
44 label = "firmware";
45 reg = <0x50000 0x7b0000>;
46 };
47 };
48 };
49 };
50
51 pinctrl {
52 state_default: pinctrl0 {
53 gpio {
54 ralink,group = "i2c", "jtag", "uartf";
55 ralink,function = "gpio";
56 };
57 };
58 };
59
60 ethernet@10100000 {
61 mtd-mac-address = <&factory 0x4>;
62 };
63
64 esw@10110000 {
65 ralink,portmap = <0x3f>;
66 };
67
68 wmac@10180000 {
69 ralink,mtd-eeprom = <&factory 0>;
70 };
71
72 ehci@101c0000 {
73 status = "okay";
74 };
75
76 ohci@101c1000 {
77 status = "okay";
78 };
79
80 gpio-leds {
81 compatible = "gpio-leds";
82 wifi {
83 label = "ht-tm02:blue:wifi";
84 gpios = <&gpio0 7 1>;
85 };
86 status {
87 label = "ht-tm02:yellow:status";
88 gpios = <&gpio0 12 1>;
89 };
90
91 };
92
93 gpio-keys-polled {
94 compatible = "gpio-keys-polled";
95 #address-cells = <1>;
96 #size-cells = <0>;
97 poll-interval = <20>;
98 wps {
99 label = "reset";
100 gpios = <&gpio0 10 1>;
101 linux,code = <0x198>;
102 };
103 };
104 };