5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
13 led-status = &led_power;
17 device_type = "memory";
18 reg = <0x0 0x10000000>;
22 bootargs = "console=ttyS0,115200";
25 palmbus: palmbus@1E000000 {
31 compatible = "nxp,pcf8563";
38 compatible = "gpio-leds";
41 label = "pbr-m1:blue:power";
42 gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
46 label = "pbr-m1:blue:sys";
47 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
51 label = "pbr-m1:blue:internet";
52 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
56 label = "pbr-m1:blue:wlan2g";
57 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
61 label = "pbr-m1:blue:wlan5g";
62 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
67 compatible = "gpio-keys-polled";
74 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_RESTART>;
80 compatible = "gpio-export";
84 gpio-export,name = "power_usb2";
85 gpio-export,output = <1>;
86 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
90 gpio-export,name = "power_usb3";
91 gpio-export,output = <1>;
92 gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
96 gpio-export,name = "power_sata";
97 gpio-export,output = <1>;
98 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
103 compatible = "gpio-beeper";
104 gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
110 pinctrl-names = "default";
111 pinctrl-0 = <&sdhci_pins>;
118 #address-cells = <1>;
120 compatible = "jedec,spi-nor";
122 spi-max-frequency = <10000000>;
123 m25p,chunked-io = <32>;
132 label = "u-boot-env";
133 reg = <0x30000 0x10000>;
137 factory: partition@40000 {
139 reg = <0x40000 0x10000>;
145 reg = <0x50000 0xfb0000>;
155 reg = <0x0000 0 0 0 0>;
157 mediatek,mtd-eeprom = <&factory 0x8000>;
158 ieee80211-freq-limit = <5000000 6000000>;
164 reg = <0x0000 0 0 0 0>;
166 mediatek,mtd-eeprom = <&factory 0x0000>;
172 mtd-mac-address = <&factory 0xe000>;
176 state_default: pinctrl0 {
178 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
179 ralink,function = "gpio";