5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "asus,rt-n56u", "ralink,rt3883-soc";
10 model = "Asus RT-N56U";
13 led-status = &led_power;
17 compatible = "cfi-flash";
18 reg = <0x1c000000 0x800000>;
24 reg = <0x0 0x0030000>;
30 reg = <0x00030000 0x00010000>;
35 factory: partition@40000 {
36 reg = <0x00040000 0x00010000>;
42 reg = <0x00050000 0x007b0000>;
48 compatible = "realtek,rtl8367";
49 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
50 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
51 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
55 compatible = "gpio-keys-polled";
58 poll-interval = <100>;
62 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
63 linux,code = <KEY_RESTART>;
68 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
69 linux,code = <KEY_WPS_BUTTON>;
74 compatible = "gpio-leds";
77 label = "rt-n56u:blue:power";
78 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
82 label = "rt-n56u:blue:lan";
83 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
87 label = "rt-n56u:blue:wan";
88 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
92 label = "rt-n56u:blue:usb";
93 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
103 state_default: pinctrl0 {
105 ralink,group = "spi", "i2c", "jtag", "uartf";
106 ralink,function = "gpio";
112 mtd-mac-address = <&factory 0x4>;
115 mediatek,fixed-link = <1000 1 1 1>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pci_pins>;
126 ralink,group = "pci";
127 ralink,function = "pci-fnc";
136 compatible = "pci1814,3091";
137 reg = <0x10000 0 0 0 0>;
138 ralink,mtd-eeprom = <&factory 0x8000>;
147 ralink,mtd-eeprom = <&factory 0>;