target/linux/ramips/dts/W306R_V20.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "W306R_V20", "ralink,rt3052-soc";
   7         model = "Tenda W306R V2.0";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12
  13                 bank-width = <2>;
  14                 device-width = <2>;
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17
  18                 partition@0 {
  19                         label = "u-boot";
  20                         reg = <0x0 0x30000>;
  21                         read-only;
  22                 };
  23
  24                 partition@30000 {
  25                         label = "u-boot-env";
  26                         reg = <0x30000 0x10000>;
  27                         read-only;
  28                 };
  29
  30                 factory: partition@40000 {
  31                         label = "factory";
  32                         reg = <0x40000 0x10000>;
  33                         read-only;
  34                 };
  35
  36                 partition@50000 {
  37                         label = "firmware";
  38                         reg = <0x50000 0x3b0000>;
  39                 };
  40         };
  41
  42         pinctrl {
  43                 state_default: pinctrl0 {
  44                         gpio {
  45                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  46                                 ralink,function = "gpio";
  47                         };
  48                 };
  49         };
  50
  51         ethernet@10100000 {
  52                 mtd-mac-address = <&factory 0x28>;
  53         };
  54
  55         esw@10110000 {
  56                 ralink,portmap = <0x3e>;
  57         };
  58
  59         wmac@10180000 {
  60                 ralink,mtd-eeprom = <&factory 0>;
  61         };
  62
  63         gpio-leds {
  64                 compatible = "gpio-leds";
  65                 sys {
  66                         label = "w306r-v20:green:sys";
  67                         gpios = <&gpio0 9 1>;
  68                 };
  69                 wps {
  70                         label = "w306r-v20:green:wps";
  71                         gpios = <&gpio0 13 1>;
  72                 };
  73         };
  74
  75         gpio-keys-polled {
  76                 compatible = "gpio-keys-polled";
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79                 poll-interval = <20>;
  80                 reset {
  81                         label = "RESET/WPS";
  82                         gpios = <&gpio0 10 1>;
  83                         linux,code = <0x198>;
  84                 };
  85         };
  86 };