3 /include/ "rt3050.dtsi"
6 compatible = "WL-351", "ralink,rt3052-soc";
7 model = "Sitecom WL-351 v1 002";
10 ralink,memory = <0x0 0x200000 0x4000000>;
15 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
20 ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii";
21 ralink,gpiomux = "i2c", "spi", "mdio";
22 ralink,uartmux = "gpio";
33 compatible = "cfi-flash";
34 reg = <0x1f000000 0x800000>;
49 reg = <0x30000 0x10000>;
53 factory: partition@40000 {
55 reg = <0x40000 0x10000>;
61 reg = <0x50000 0x3b0000>;
71 ralink,portmap = <0x3f>;
72 ralink,fct2 = <0x0002500c>;
74 * ext phy base addr 31, rx/tx clock skew 0,
75 * turbo mii off, rgmi 3.3v off, port 5 polling off
76 * port5: enabled, gige, full-duplex, rx/tx-flow-control
77 * port6: enabled, gige, full-duplex, rx/tx-flow-control
79 ralink,fpa2 = <0x1f003fff>;
91 compatible = "gpio-leds";
93 label = "wl-351:amber:power";
97 label = "wl-351:amber:unpopulated";
98 gpios = <&gpio0 12 1>;
101 label = "wl-351:blue:unpopulated";
102 gpios = <&gpio0 13 1>;
107 compatible = "gpio-keys-polled";
108 #address-cells = <1>;
110 poll-interval = <20>;
113 gpios = <&gpio0 10 1>;
114 linux,code = <0x198>;
118 gpios = <&gpio0 0 1>;
119 linux,code = <0x211>;
124 compatible = "rtl8367rb";
125 gpio-sda = <&gpio0 1 0>;
126 gpio-sck = <&gpio0 2 0>;