3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
10 led-status = &led_status;
14 device_type = "memory";
15 reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
19 bootargs = "console=ttyS0,115200";
22 palmbus: palmbus@1E000000 {
29 compatible = "gpio-keys-polled";
34 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_RESTART>;
40 compatible = "gpio-leds";
43 label = "zbt-wg3526:green:status";
44 gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
57 compatible = "jedec,spi-nor";
59 spi-max-frequency = <10000000>;
60 m25p,chunked-io = <32>;
63 compatible = "fixed-partitions";
75 reg = <0x30000 0x10000>;
79 factory: partition@40000 {
81 reg = <0x40000 0x10000>;
85 firmware: partition@50000 {
98 compatible = "pci14c3,7603";
99 reg = <0x0000 0 0 0 0>;
100 mediatek,mtd-eeprom = <&factory 0x0000>;
106 compatible = "pci14c3,7662";
107 reg = <0x0000 0 0 0 0>;
108 mediatek,mtd-eeprom = <&factory 0x8000>;
109 ieee80211-freq-limit = <5000000 6000000>;
114 mtd-mac-address = <&factory 0xe000>;
118 state_default: pinctrl0 {
120 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
121 ralink,function = "gpio";