3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
10 led-status = &led_status;
14 device_type = "memory";
15 reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
19 bootargs = "console=ttyS0,115200";
22 palmbus: palmbus@1E000000 {
29 compatible = "gpio-keys-polled";
36 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_RESTART>;
42 compatible = "gpio-leds";
45 label = "zbt-wg3526:green:status";
46 gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
61 compatible = "jedec,spi-nor";
63 spi-max-frequency = <10000000>;
64 m25p,chunked-io = <32>;
74 reg = <0x30000 0x10000>;
78 factory: partition@40000 {
80 reg = <0x40000 0x10000>;
84 firmware: partition@50000 {
96 compatible = "pci14c3,7603";
97 reg = <0x0000 0 0 0 0>;
98 mediatek,mtd-eeprom = <&factory 0x0000>;
104 compatible = "pci14c3,7662";
105 reg = <0x0000 0 0 0 0>;
106 mediatek,mtd-eeprom = <&factory 0x8000>;
107 ieee80211-freq-limit = <5000000 6000000>;
112 mtd-mac-address = <&factory 0xe000>;
116 state_default: pinctrl0 {
118 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
119 ralink,function = "gpio";