3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
10 led-status = &led_status;
14 device_type = "memory";
15 reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
19 bootargs = "console=ttyS0,115200";
22 palmbus: palmbus@1E000000 {
29 compatible = "gpio-keys-polled";
34 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_RESTART>;
40 compatible = "gpio-leds";
43 label = "zbt-wg3526:green:status";
44 gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
59 compatible = "jedec,spi-nor";
61 spi-max-frequency = <10000000>;
62 m25p,chunked-io = <32>;
72 reg = <0x30000 0x10000>;
76 factory: partition@40000 {
78 reg = <0x40000 0x10000>;
82 firmware: partition@50000 {
94 compatible = "pci14c3,7603";
95 reg = <0x0000 0 0 0 0>;
96 mediatek,mtd-eeprom = <&factory 0x0000>;
102 compatible = "pci14c3,7662";
103 reg = <0x0000 0 0 0 0>;
104 mediatek,mtd-eeprom = <&factory 0x8000>;
105 ieee80211-freq-limit = <5000000 6000000>;
110 mtd-mac-address = <&factory 0xe000>;
114 state_default: pinctrl0 {
116 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
117 ralink,function = "gpio";