target/linux/ramips/dts/mt7620a_alfa-network_ac1200rm.dts

   1 /*
   2  *  BSD LICENSE
   3  *
   4  *  Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
   5  *  All rights reserved.
   6  *
   7  *  Redistribution and use in source and binary forms, with or without
   8  *  modification, are permitted provided that the following conditions
   9  *  are met:
  10  *
  11  *    1. Redistributions of source code must retain the above copyright
  12  *       notice, this list of conditions and the following disclaimer.
  13  *    2. Redistributions in binary form must reproduce the above copyright
  14  *       notice, this list of conditions and the following disclaimer in the
  15  *       documentation and/or other materials provided with the distribution.
  16  *    3. Neither the names of the copyright holders nor the names of any
  17  *       contributors may be used to endorse or promote products derived
  18  *       from this software without specific prior written permission.
  19  *
  20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 #include "mt7620a.dtsi"
  34
  35 #include <dt-bindings/gpio/gpio.h>
  36 #include <dt-bindings/input/input.h>
  37
  38 / {
  39         compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
  40         model = "ALFA Network AC1200RM";
  41
  42         aliases {
  43                 led-boot = &led_wps;
  44                 led-failsafe = &led_wps;
  45         };
  46
  47         chosen {
  48                 bootargs = "console=ttyS0,115200";
  49         };
  50
  51         keys {
  52                 compatible = "gpio-keys";
  53
  54                 reset {
  55                         label = "reset";
  56                         gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_RESTART>;
  58                 };
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63
  64                 wlan2g {
  65                         label = "ac1200rm:green:wlan2g";
  66                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 led_wps: wps {
  70                         label = "ac1200rm:green:wps";
  71                         gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
  72                 };
  73         };
  74 };
  75
  76 &ehci {
  77         status = "okay";
  78 };
  79
  80 &ethernet {
  81         pinctrl-names = "default";
  82         pinctrl-0 = <&ephy_pins>;
  83
  84         mtd-mac-address = <&factory 0x28>;
  85
  86         mediatek,portmap = "llllw";
  87 };
  88
  89 &gpio1 {
  90         status = "okay";
  91 };
  92
  93 &gpio2 {
  94         status = "okay";
  95 };
  96
  97 &gpio3 {
  98         status = "okay";
  99 };
 100
 101 &gsw {
 102         mediatek,port4 = "ephy";
 103 };
 104
 105 &ohci {
 106         status = "okay";
 107 };
 108
 109 &pcie {
 110         status = "okay";
 111 };
 112
 113 &pcie0 {
 114         mt76@0,0 {
 115                 reg = <0x0000 0 0 0 0>;
 116                 mediatek,mtd-eeprom = <&factory 0x8000>;
 117                 ieee80211-freq-limit = <5000000 6000000>;
 118
 119                 led {
 120                         led-sources = <2>;
 121                         led-active-low;
 122                 };
 123         };
 124 };
 125
 126 &state_default {
 127         gpio {
 128                 groups = "nd_sd", "spi refclk", "wled";
 129                 function = "gpio";
 130         };
 131 };
 132
 133 &spi0 {
 134         status = "okay";
 135
 136         flash@0 {
 137                 compatible = "jedec,spi-nor";
 138                 reg = <0>;
 139                 spi-max-frequency = <10000000>;
 140
 141                 partitions {
 142                         compatible = "fixed-partitions";
 143                         #address-cells = <1>;
 144                         #size-cells = <1>;
 145
 146                         partition@0 {
 147                                 label = "u-boot";
 148                                 reg = <0x0 0x30000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@30000 {
 153                                 label = "u-boot-env";
 154                                 reg = <0x30000 0x1000>;
 155                         };
 156
 157                         partition@31000 {
 158                                 label = "config";
 159                                 reg = <0x31000 0xf000>;
 160                                 read-only;
 161                         };
 162
 163                         factory: partition@40000 {
 164                                 label = "factory";
 165                                 reg = <0x40000 0x10000>;
 166                                 read-only;
 167                         };
 168
 169                         partition@50000 {
 170                                 compatible = "denx,uimage";
 171                                 label = "firmware";
 172                                 reg = <0x50000 0xfb0000>;
 173                         };
 174                 };
 175         };
 176 };
 177
 178 &wmac {
 179         ralink,mtd-eeprom = <&factory 0x0>;
 180 };