1 #include "mt7620a.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "asus,rp-n53", "ralink,mt7620a-soc";
11 compatible = "gpio-keys";
15 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
21 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
27 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
33 gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
39 compatible = "gpio-leds";
43 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
48 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
53 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
58 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
63 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
68 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
73 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
78 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
93 pinctrl-names = "default";
94 pinctrl-0 = <&pcm_i2s_pins>;
101 compatible = "jedec,spi-nor";
103 spi-max-frequency = <10000000>;
106 compatible = "fixed-partitions";
107 #address-cells = <1>;
117 label = "u-boot-env";
118 reg = <0x30000 0x10000>;
122 factory: partition@40000 {
124 reg = <0x40000 0x10000>;
129 compatible = "denx,uimage";
131 reg = <0x50000 0x7b0000>;
146 ralink,mtd-eeprom = <&factory 0x0>;
151 groups = "mdio", "rgmii1";
157 pinctrl-names = "default";
158 pinctrl-0 = <&ephy_pins>;
167 compatible = "pci1814,5592";
168 reg = <0x0000 0 0 0 0>;
170 ralink,mtd-eeprom = <&factory 0x8000>;