1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "mt7620a.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "engenius,epg600", "ralink,mt7620a-soc";
10 model = "EnGenius EPG600";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 bootargs = "console=ttyS0,115200";
24 compatible = "gpio-keys";
27 linux,code = <KEY_RESTART>;
28 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
29 debounce-interval = <60>;
33 linux,code = <KEY_WPS_BUTTON>;
34 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
35 debounce-interval = <60>;
40 gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
41 debounce-interval = <60>;
46 compatible = "gpio-leds";
49 label = "amber:power";
50 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
55 label = "blue:wlan2g";
56 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
57 linux,default-trigger = "phy1tpt";
61 label = "blue:wlan5g";
62 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
67 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
71 label = "amber:wps5g";
72 gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
77 gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
98 compatible = "jedec,spi-nor";
100 spi-max-frequency = <30000000>;
103 compatible = "fixed-partitions";
104 #address-cells = <1>;
114 label = "u-boot-env";
115 reg = <0x30000 0x10000>;
118 factory: partition@40000 {
120 reg = <0x40000 0x10000>;
124 compatible = "fixed-layout";
125 #address-cells = <1>;
128 eeprom_factory_0: eeprom@0 {
134 rf: partition@50000 {
136 reg = <0x50000 0x10000>;
140 compatible = "fixed-layout";
141 #address-cells = <1>;
144 eeprom_rf_0: eeprom@0 {
148 macaddr_rf_4: macaddr@4 {
156 reg = <0x60000 0xf40000>;
157 compatible = "denx,uimage";
162 reg = <0xfa0000 0x10000>;
168 reg = <0xfb0000 0x50000>;
176 pinctrl-names = "default";
177 pinctrl-0 = <&mdio_pins &rgmii1_pins &rgmii2_pins>;
179 nvmem-cells = <&macaddr_rf_4>;
180 nvmem-cell-names = "mac-address";
185 phy-mode = "rgmii-txid";
187 mediatek,fixed-link = <1000 1 1 1>;
197 qca,ar8327-initvals = <
198 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
199 0x08 0x01000000 /* PORT5 PAD MODE CTRL */
200 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
201 0x10 0x40000000 /* POWER-ON STRAPPING */
202 0x7c 0x0000007e /* PORT0_STATUS */
203 0x94 0x0000007e /* PORT6_STATUS */
210 mediatek,ephy-disable;
219 compatible = "pci1814,3091";
220 reg = <0x0000 0 0 0 0>;
221 nvmem-cells = <&eeprom_factory_0>;
222 nvmem-cell-names = "eeprom";
227 nvmem-cells = <&eeprom_rf_0>;
228 nvmem-cell-names = "eeprom";
241 groups = "ephy", "wled", "spi refclk", "i2c", "uartf", "nd_sd";