1 #include "mt7620a.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
8 model = "Phicomm PSG1208";
12 led-failsafe = &led_wps;
13 led-running = &led_wps;
14 led-upgrade = &led_wps;
18 compatible = "gpio-leds";
21 label = "psg1208:white:wps";
22 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
26 label = "psg1208:white:wlan2g";
27 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
32 compatible = "gpio-keys";
36 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_RESTART>;
54 compatible = "jedec,spi-nor";
56 spi-max-frequency = <10000000>;
59 compatible = "fixed-partitions";
71 reg = <0x30000 0x10000>;
75 factory: partition@30000 {
77 reg = <0x40000 0x10000>;
82 compatible = "denx,uimage";
84 reg = <0x50000 0x7b0000>;
92 groups = "i2c", "spi refclk", "wled";
98 pinctrl-names = "default";
99 pinctrl-0 = <&ephy_pins>;
101 mtd-mac-address = <&factory 0x4>;
103 mediatek,portmap = "llllw";
112 reg = <0x0000 0 0 0 0>;
113 mediatek,mtd-eeprom = <&factory 0x8000>;
114 ieee80211-freq-limit = <5000000 6000000>;
119 ralink,mtd-eeprom = <&factory 0x0>;