1 #include "mt7620a.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
8 model = "Planex CS-QR10";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-leds";
22 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
27 compatible = "gpio-keys";
31 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
32 linux,code = <KEY_RESTART>;
37 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_WPS_BUTTON>;
53 pinctrl-names = "default";
54 pinctrl-0 = <&pcm_i2s_pins>;
61 compatible = "jedec,spi-nor";
63 spi-max-frequency = <10000000>;
66 compatible = "fixed-partitions";
78 reg = <0x30000 0x10000>;
82 factory: partition@40000 {
83 compatible = "nvmem-cells";
85 reg = <0x40000 0x10000>;
90 eeprom_factory_0: eeprom@0 {
94 macaddr_factory_4: macaddr@4 {
100 compatible = "denx,uimage";
102 reg = <0x50000 0x7b0000>;
118 groups = "spi refclk", "rgmii1";
123 function = "wdt refclk";
128 pinctrl-names = "default";
129 pinctrl-0 = <&ephy_pins>;
131 nvmem-cells = <&macaddr_factory_4>;
132 nvmem-cell-names = "mac-address";
134 mediatek,portmap = "llllw";
150 nvmem-cells = <&eeprom_factory_0>;
151 nvmem-cell-names = "eeprom";