1 #include "mt7620a.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
8 model = "Planex MZK-750DHP";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-leds";
21 label = "mzk-750dhp:green:wps";
22 gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
26 label = "mzk-750dhp:green:power";
27 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
31 label = "mzk-750dhp:green:wlan5g";
32 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
37 compatible = "gpio-keys";
41 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_RESTART>;
47 gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_WPS_BUTTON>;
65 compatible = "jedec,spi-nor";
67 spi-max-frequency = <10000000>;
70 compatible = "fixed-partitions";
82 reg = <0x30000 0x10000>;
86 factory: partition@40000 {
88 reg = <0x40000 0x10000>;
93 compatible = "denx,uimage";
95 reg = <0x50000 0x7b0000>;
103 groups = "i2c", "spi refclk", "rgmii1", "nd_sd";
109 pinctrl-names = "default";
110 pinctrl-0 = <&ephy_pins>;
112 mtd-mac-address = <&factory 0x4>;
114 mediatek,portmap = "llllw";
118 mediatek,port4 = "ephy";
122 ralink,mtd-eeprom = <&factory 0x0>;
131 reg = <0x0000 0 0 0 0>;
132 mediatek,mtd-eeprom = <&factory 0x8000>;