1 // SPDX-License-Identifier: GPL-2.0-or-later
3 #include "mt7620a.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "wavlink,wl-wn530hg4", "ralink,mt7620a-soc";
10 model = "Wavlink WL-WN530HG4";
13 led-boot = &led_status_blue;
14 led-failsafe = &led_status_blue;
15 led-running = &led_status_blue;
16 led-upgrade = &led_status_blue;
20 compatible = "gpio-leds";
22 led_status_blue: status_blue {
23 label = "blue:status";
24 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
28 label = "yellow:status";
29 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
34 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
39 compatible = "gpio-keys";
43 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
53 compatible = "jedec,spi-nor";
55 spi-max-frequency = <24000000>;
58 compatible = "fixed-partitions";
70 reg = <0x30000 0x10000>;
74 factory: partition@40000 {
76 reg = <0x40000 0x10000>;
80 compatible = "fixed-layout";
84 eeprom_factory_0: eeprom@0 {
88 eeprom_factory_8000: eeprom@8000 {
92 macaddr_factory_28: macaddr@28 {
99 compatible = "denx,uimage";
101 reg = <0x50000 0x7b0000>;
109 groups = "i2c", "uartf";
115 pinctrl-names = "default";
116 pinctrl-0 = <&rgmii2_pins &mdio_pins>;
118 nvmem-cells = <&macaddr_factory_28>;
119 nvmem-cell-names = "mac-address";
121 mediatek,portmap = "llllw";
125 phy-handle = <&phy5>;
132 phy5: ethernet-phy@5 {
145 reg = <0x0000 0 0 0 0>;
146 nvmem-cells = <&eeprom_factory_8000>;
147 nvmem-cell-names = "eeprom";
148 ieee80211-freq-limit = <5000000 6000000>;
153 pinctrl-names = "default", "pa_gpio";
154 pinctrl-0 = <&pa_pins>;
155 pinctrl-1 = <&pa_gpio_pins>;
156 nvmem-cells = <&eeprom_factory_0>;
157 nvmem-cell-names = "eeprom";