1 #include "mt7620a.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
8 model = "Zbtlink ZBT-APE522II";
11 bootargs = "console=ttyS0,115200";
15 compatible = "gpio-leds";
18 label = "zbt-ape522ii:green:sys1";
19 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
23 label = "zbt-ape522ii:green:sys2";
24 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
28 label = "zbt-ape522ii:green:sys3";
29 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
33 label = "zbt-ape522ii:green:sys4";
34 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
38 label = "zbt-ape522ii:green:wlan2g4";
39 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
44 compatible = "gpio-keys";
48 gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
49 linux,code = <KEY_RESTART>;
74 compatible = "jedec,spi-nor";
76 spi-max-frequency = <10000000>;
79 compatible = "fixed-partitions";
90 reg = <0x30000 0x10000>;
94 factory: partition@40000 {
96 reg = <0x40000 0x10000>;
101 compatible = "denx,uimage";
103 reg = <0x50000 0xf80000>;
110 pinctrl-names = "default";
111 pinctrl-0 = <&ephy_pins>;
113 mtd-mac-address = <&factory 0x4>;
115 mediatek,portmap = "llllw";
119 ralink,mtd-eeprom = <&factory 0x0>;
120 pinctrl-names = "default";
121 pinctrl-0 = <&pa_pins>;
130 reg = <0x0000 0 0 0 0>;
131 mediatek,mtd-eeprom = <&factory 0x8000>;
132 ieee80211-freq-limit = <5000000 6000000>;
138 groups = "wled", "i2c", "uartf", "wdt";