1 #include "mt7620n.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
8 model = "Asus RT-N14U";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-leds";
22 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
27 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
32 gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
33 trigger-sources = <&ohci_port1>, <&ehci_port1>;
34 linux,default-trigger = "usbport";
39 gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
44 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
49 compatible = "gpio-keys";
53 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_RESTART>;
59 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
60 linux,code = <KEY_WPS_BUTTON>;
77 compatible = "jedec,spi-nor";
79 spi-max-frequency = <10000000>;
82 compatible = "fixed-partitions";
94 reg = <0x30000 0x10000>;
98 factory: partition@40000 {
100 reg = <0x40000 0x10000>;
105 compatible = "denx,uimage";
107 reg = <0x50000 0xfb0000>;
122 nvmem-cells = <&macaddr_factory_4>;
123 nvmem-cell-names = "mac-address";
125 mediatek,portmap = "wllll";
129 ralink,mtd-eeprom = <&factory 0x0>;
134 groups = "ephy", "wled", "i2c";
140 compatible = "nvmem-cells";
141 #address-cells = <1>;
144 macaddr_factory_4: macaddr@4 {