1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 led-boot = &led_power;
11 led-failsafe = &led_power;
12 led-running = &led_power;
13 led-upgrade = &led_power;
17 compatible = "gpio-keys";
21 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
22 linux,code = <KEY_RESTART>;
27 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
28 linux,code = <KEY_WPS_BUTTON>;
33 compatible = "gpio-leds";
37 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
41 label = "blue:wlan5g";
42 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
43 linux,default-trigger = "phy1radio";
47 label = "blue:wlan2g";
48 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
49 linux,default-trigger = "phy0radio";
66 compatible = "fixed-partitions";
78 reg = <0xe0000 0x100000>;
82 factory: partition@1e0000 {
84 reg = <0x1e0000 0x100000>;
88 factory2: partition@2e0000 {
90 reg = <0x2e0000 0x100000>;
96 reg = <0x3e0000 0x400000>;
101 reg = <0x7e0000 0x2e00000>;
106 reg = <0x35e0000 0x3200000>;
117 compatible = "pci14c3,7615";
118 reg = <0x0000 0 0 0 0>;
119 mediatek,mtd-eeprom = <&factory 0x0000>;
120 ieee80211-freq-limit = <2400000 2500000>;
126 compatible = "pci14c3,7615";
127 reg = <0x0000 0 0 0 0>;
128 mediatek,mtd-eeprom = <&factory 0x8000>;
129 ieee80211-freq-limit = <5000000 6000000>;
134 nvmem-cells = <&macaddr_factory_e000>;
135 nvmem-cell-names = "mac-address";
169 groups = "uart2", "uart3", "i2c";
175 compatible = "nvmem-cells";
176 #address-cells = <1>;
179 macaddr_factory_e000: macaddr@e000 {