1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 led-boot = &led_power;
11 led-failsafe = &led_power;
12 led-running = &led_power;
13 led-upgrade = &led_power;
17 compatible = "gpio-keys";
21 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
22 linux,code = <KEY_RESTART>;
27 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
28 linux,code = <KEY_WPS_BUTTON>;
33 compatible = "gpio-leds";
37 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
41 label = "blue:wlan5g";
42 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
43 linux,default-trigger = "phy1tpt";
47 label = "blue:wlan2g";
48 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
49 linux,default-trigger = "phy0tpt";
66 compatible = "fixed-partitions";
78 reg = <0xe0000 0x100000>;
82 factory: partition@1e0000 {
84 reg = <0x1e0000 0x100000>;
88 compatible = "fixed-layout";
92 eeprom_factory_0: eeprom@0 {
96 eeprom_factory_8000: eeprom@8000 {
97 reg = <0x8000 0x4da8>;
100 macaddr_factory_e000: macaddr@e000 {
106 factory2: partition@2e0000 {
108 reg = <0x2e0000 0x100000>;
114 reg = <0x3e0000 0x400000>;
119 reg = <0x7e0000 0x2e00000>;
124 reg = <0x35e0000 0x3200000>;
135 compatible = "pci14c3,7615";
136 reg = <0x0000 0 0 0 0>;
137 nvmem-cells = <&eeprom_factory_0>;
138 nvmem-cell-names = "eeprom";
139 ieee80211-freq-limit = <2400000 2500000>;
145 compatible = "pci14c3,7615";
146 reg = <0x0000 0 0 0 0>;
147 nvmem-cells = <&eeprom_factory_8000>;
148 nvmem-cell-names = "eeprom";
149 ieee80211-freq-limit = <5000000 6000000>;
154 nvmem-cells = <&macaddr_factory_e000>;
155 nvmem-cell-names = "mac-address";
161 phy-handle = <ðphy0>;
163 nvmem-cells = <&macaddr_factory_e000>;
164 nvmem-cell-names = "mac-address";
168 ethphy0: ethernet-phy@0 {
199 groups = "uart2", "uart3", "i2c";