1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 bootargs = "console=ttyS0,57600";
21 palmbus: palmbus@1E000000 {
28 compatible = "gpio-keys";
32 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
33 linux,code = <KEY_RESTART>;
38 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_WPS_BUTTON>;
44 compatible = "gpio-leds";
47 label = "rt-ac85p:blue:power";
48 gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
51 label = "rt-ac85p:blue:wlan2g";
52 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
53 linux,default-trigger = "phy0radio";
57 label = "rt-ac85p:blue:wlan5g";
58 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
59 linux,default-trigger = "phy1radio";
72 compatible = "fixed-partitions";
84 reg = <0xe0000 0x100000>;
88 factory: partition@1e0000 {
90 reg = <0x1e0000 0x100000>;
94 factory2: partition@2e0000 {
96 reg = <0x2e0000 0x100000>;
102 reg = <0x3e0000 0x400000>;
107 reg = <0x7e0000 0x2e00000>;
112 reg = <0x35e0000 0x3200000>;
123 compatible = "pci14c3,7615";
124 reg = <0x0000 0 0 0 0>;
125 mediatek,mtd-eeprom = <&factory 0x0000>;
126 ieee80211-freq-limit = <2400000 2500000>;
132 compatible = "pci14c3,7615";
133 reg = <0x0000 0 0 0 0>;
134 mediatek,mtd-eeprom = <&factory 0x8000>;
135 ieee80211-freq-limit = <5000000 6000000>;
140 mtd-mac-address = <&factory 0xe000>;
141 mediatek,portmap = "wllll";
152 state_default: pinctrl0 {
154 ralink,group = "uart2", "uart3", "i2c";
155 ralink,function = "gpio";