1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 led-boot = &led_power;
11 led-failsafe = &led_power;
12 led-running = &led_power;
13 led-upgrade = &led_power;
17 compatible = "gpio-keys";
21 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
22 linux,code = <KEY_RESTART>;
27 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
28 linux,code = <KEY_WPS_BUTTON>;
33 compatible = "gpio-leds";
37 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
41 label = "blue:wlan5g";
42 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
43 linux,default-trigger = "phy1tpt";
47 label = "blue:wlan2g";
48 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
49 linux,default-trigger = "phy0tpt";
66 compatible = "fixed-partitions";
78 reg = <0xe0000 0x100000>;
82 factory: partition@1e0000 {
83 compatible = "nvmem-cells";
85 reg = <0x1e0000 0x100000>;
90 eeprom_factory_0: eeprom@0 {
94 eeprom_factory_8000: eeprom@8000 {
95 reg = <0x8000 0x4da8>;
98 macaddr_factory_e000: macaddr@e000 {
103 factory2: partition@2e0000 {
105 reg = <0x2e0000 0x100000>;
111 reg = <0x3e0000 0x400000>;
116 reg = <0x7e0000 0x2e00000>;
121 reg = <0x35e0000 0x3200000>;
132 compatible = "pci14c3,7615";
133 reg = <0x0000 0 0 0 0>;
134 nvmem-cells = <&eeprom_factory_0>;
135 nvmem-cell-names = "eeprom";
136 ieee80211-freq-limit = <2400000 2500000>;
142 compatible = "pci14c3,7615";
143 reg = <0x0000 0 0 0 0>;
144 nvmem-cells = <&eeprom_factory_8000>;
145 nvmem-cell-names = "eeprom";
146 ieee80211-freq-limit = <5000000 6000000>;
151 nvmem-cells = <&macaddr_factory_e000>;
152 nvmem-cell-names = "mac-address";
158 phy-handle = <ðphy0>;
160 nvmem-cells = <&macaddr_factory_e000>;
161 nvmem-cell-names = "mac-address";
165 ethphy0: ethernet-phy@0 {
196 groups = "uart2", "uart3", "i2c";