3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
12 led-failsafe = &led_sys;
13 led-running = &led_sys;
14 led-upgrade = &led_sys;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-leds";
26 gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
32 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
36 label = "blue:internet";
37 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
41 label = "blue:wlan2g";
42 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
46 label = "blue:wlan5g";
47 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
52 compatible = "gpio-keys";
56 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_RESTART>;
62 compatible = "gpio-export";
66 gpio-export,name = "power_usb2";
67 gpio-export,output = <1>;
68 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
72 gpio-export,name = "power_usb3";
73 gpio-export,output = <1>;
74 gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
78 gpio-export,name = "power_sata";
79 gpio-export,output = <1>;
80 gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
85 compatible = "gpio-beeper";
86 gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
95 compatible = "nxp,pcf8563";
108 compatible = "jedec,spi-nor";
110 spi-max-frequency = <50000000>;
115 compatible = "fixed-partitions";
116 #address-cells = <1>;
126 label = "u-boot-env";
127 reg = <0x30000 0x10000>;
131 factory: partition@40000 {
132 compatible = "nvmem-cells";
134 reg = <0x40000 0x10000>;
135 #address-cells = <1>;
139 eeprom_factory_0: eeprom@0 {
143 eeprom_factory_8000: eeprom@8000 {
144 reg = <0x8000 0x200>;
147 macaddr_factory_e000: macaddr@e000 {
151 macaddr_factory_e006: macaddr@e006 {
157 compatible = "denx,uimage";
159 reg = <0x50000 0x1fb0000>;
166 uart3_gpio: uart3-gpio {
176 pinctrl-0 = <&pcie_pins>, <&uart3_gpio>;
177 reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
178 <&gpio 7 GPIO_ACTIVE_LOW>;
183 reg = <0x0000 0 0 0 0>;
184 nvmem-cells = <&eeprom_factory_8000>;
185 nvmem-cell-names = "eeprom";
186 ieee80211-freq-limit = <5000000 6000000>;
192 reg = <0x0000 0 0 0 0>;
193 nvmem-cells = <&eeprom_factory_0>;
194 nvmem-cell-names = "eeprom";
199 pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
203 nvmem-cells = <&macaddr_factory_e000>;
204 nvmem-cell-names = "mac-address";
232 nvmem-cells = <&macaddr_factory_e006>;
233 nvmem-cell-names = "mac-address";
240 groups = "wdt", "rgmii2", "jtag";