5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
14 led-failsafe = &led_sys;
15 led-running = &led_sys;
16 led-upgrade = &led_sys;
20 bootargs = "console=ttyS0,115200";
23 palmbus: palmbus@1E000000 {
29 compatible = "nxp,pcf8563";
36 compatible = "gpio-leds";
39 label = "pbr-m1:blue:power";
40 gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
45 label = "pbr-m1:blue:sys";
46 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
50 label = "pbr-m1:blue:internet";
51 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
55 label = "pbr-m1:blue:wlan2g";
56 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
60 label = "pbr-m1:blue:wlan5g";
61 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
66 compatible = "gpio-keys-polled";
71 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
72 linux,code = <KEY_RESTART>;
77 compatible = "gpio-export";
81 gpio-export,name = "power_usb2";
82 gpio-export,output = <1>;
83 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
87 gpio-export,name = "power_usb3";
88 gpio-export,output = <1>;
89 gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
93 gpio-export,name = "power_sata";
94 gpio-export,output = <1>;
95 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
100 compatible = "gpio-beeper";
101 gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
113 compatible = "jedec,spi-nor";
115 spi-max-frequency = <10000000>;
118 compatible = "fixed-partitions";
119 #address-cells = <1>;
129 label = "u-boot-env";
130 reg = <0x30000 0x10000>;
134 factory: partition@40000 {
136 reg = <0x40000 0x10000>;
141 compatible = "denx,uimage";
143 reg = <0x50000 0xfb0000>;
155 reg = <0x0000 0 0 0 0>;
156 mediatek,mtd-eeprom = <&factory 0x8000>;
157 ieee80211-freq-limit = <5000000 6000000>;
163 reg = <0x0000 0 0 0 0>;
164 mediatek,mtd-eeprom = <&factory 0x0000>;
169 mtd-mac-address = <&factory 0xe000>;
173 state_default: pinctrl0 {
175 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
176 ralink,function = "gpio";