3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
8 model = "D-Link DIR-860L B1";
11 label-mac-device = &gmac0;
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_green;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_green;
20 compatible = "gpio-leds";
23 label = "orange:power";
24 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
27 led_power_green: power2 {
28 label = "green:power";
29 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
34 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
39 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
44 compatible = "gpio-keys";
48 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
54 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_WPS_BUTTON>;
64 compatible = "jedec,spi-nor";
66 spi-max-frequency = <10000000>;
69 compatible = "fixed-partitions";
81 reg = <0x30000 0x4000>;
85 radio: partition@34000 {
86 compatible = "nvmem-cells";
88 reg = <0x34000 0x4000>;
93 macaddr_radio_4: macaddr@4 {
97 eeprom_radio_0: eeprom@0 {
101 eeprom_radio_2000: eeprom@2000 {
102 reg = <0x2000 0x200>;
106 factory: partition@38000 {
108 reg = <0x38000 0x8000>;
114 reg = <0x40000 0x10000>;
119 compatible = "seama";
121 reg = <0x50000 0xfb0000>;
128 nvmem-cells = <&macaddr_radio_4>;
129 nvmem-cell-names = "mac-address";
135 phy-handle = <ðphy0>;
137 nvmem-cells = <&macaddr_radio_4>;
138 nvmem-cell-names = "mac-address";
142 ethphy0: ethernet-phy@0 {
174 reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
175 <&gpio 8 GPIO_ACTIVE_LOW>;
180 reg = <0x0000 0 0 0 0>;
181 nvmem-cells = <&eeprom_radio_2000>;
182 nvmem-cell-names = "eeprom";
183 ieee80211-freq-limit = <5000000 6000000>;
189 reg = <0x0000 0 0 0 0>;
190 nvmem-cells = <&eeprom_radio_0>;
191 nvmem-cell-names = "eeprom";
192 ieee80211-freq-limit = <2400000 2500000>;
198 groups = "uart3", "jtag", "wdt";