target/linux/ramips/dts/mt7621_lenovo_newifi-d1.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
   8         model = "Newifi-D1";
   9
  10         aliases {
  11                 led-boot = &led_blue;
  12                 led-failsafe = &led_blue;
  13                 led-running = &led_blue;
  14                 led-upgrade = &led_blue;
  15                 label-mac-device = &gmac0;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 status-red {
  26                         label = "red:status";
  27                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 status-green {
  31                         label = "green:status";
  32                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 led_blue: status-blue {
  36                         label = "blue:status";
  37                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  38                         default-state = "on";
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50         };
  51
  52         gpio_export {
  53                 compatible = "gpio-export";
  54                 #size-cells = <0>;
  55
  56                 usb2power {
  57                         gpio-export,name = "usb2power";
  58                         gpio-export,output = <1>;
  59                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  60                 };
  61
  62                 usb3power {
  63                         gpio-export,name = "usb3power";
  64                         gpio-export,output = <1>;
  65                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  66                 };
  67         };
  68 };
  69
  70 &sdhci {
  71         status = "okay";
  72 };
  73
  74 &spi0 {
  75         status = "okay";
  76
  77         flash@0 {
  78                 compatible = "jedec,spi-nor";
  79                 reg = <0>;
  80                 spi-max-frequency = <45000000>;
  81                 broken-flash-reset;
  82
  83                 partitions {
  84                         compatible = "fixed-partitions";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87
  88                         partition@0 {
  89                                 label = "u-boot";
  90                                 reg = <0x0 0x30000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@30000 {
  95                                 label = "u-boot-env";
  96                                 reg = <0x30000 0x10000>;
  97                                 read-only;
  98                         };
  99
 100                         factory: partition@40000 {
 101                                 label = "factory";
 102                                 reg = <0x40000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@50000 {
 107                                 compatible = "denx,uimage";
 108                                 label = "firmware";
 109                                 reg = <0x50000 0x1fb0000>;
 110                         };
 111                 };
 112         };
 113 };
 114
 115 &pcie {
 116         status = "okay";
 117 };
 118
 119 &pcie0 {
 120         mt76@0,0 {
 121                 reg = <0x0000 0 0 0 0>;
 122                 mediatek,mtd-eeprom = <&factory 0x8000>;
 123                 ieee80211-freq-limit = <5000000 6000000>;
 124         };
 125 };
 126
 127 &pcie1 {
 128         mt76@0,0 {
 129                 reg = <0x0000 0 0 0 0>;
 130                 mediatek,mtd-eeprom = <&factory 0x0000>;
 131         };
 132 };
 133
 134 &gmac0 {
 135         mtd-mac-address = <&factory 0xe000>;
 136 };
 137
 138 &switch0 {
 139         ports {
 140                 port@1 {
 141                         status = "okay";
 142                         label = "lan2";
 143                 };
 144
 145                 port@2 {
 146                         status = "okay";
 147                         label = "lan1";
 148                 };
 149
 150                 port@4 {
 151                         status = "okay";
 152                         label = "wan";
 153                         mtd-mac-address = <&factory 0xe006>;
 154                 };
 155         };
 156 };
 157
 158 &state_default {
 159         gpio {
 160                 groups = "jtag", "uart2";
 161                 function = "gpio";
 162         };
 163 };