target/linux/ramips/dts/mt7621_lenovo_newifi-d1.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
   8         model = "Lenovo Newifi D1";
   9
  10         aliases {
  11                 led-boot = &led_blue;
  12                 led-failsafe = &led_blue;
  13                 led-running = &led_blue;
  14                 led-upgrade = &led_blue;
  15                 label-mac-device = &gmac0;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 status-red {
  26                         label = "red:status";
  27                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 status-green {
  31                         label = "green:status";
  32                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 led_blue: status-blue {
  36                         label = "blue:status";
  37                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  38                         default-state = "on";
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50
  51                 wps {
  52                         label = "wps";
  53                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_WPS_BUTTON>;
  55                 };
  56         };
  57
  58         gpio_export {
  59                 compatible = "gpio-export";
  60                 #size-cells = <0>;
  61
  62                 usb2power {
  63                         gpio-export,name = "usb2power";
  64                         gpio-export,output = <1>;
  65                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  66                 };
  67
  68                 usb3power {
  69                         gpio-export,name = "usb3power";
  70                         gpio-export,output = <1>;
  71                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  72                 };
  73         };
  74 };
  75
  76 &sdhci {
  77         status = "okay";
  78 };
  79
  80 &spi0 {
  81         status = "okay";
  82
  83         flash@0 {
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <45000000>;
  87                 broken-flash-reset;
  88
  89                 partitions {
  90                         compatible = "fixed-partitions";
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93
  94                         partition@0 {
  95                                 label = "u-boot";
  96                                 reg = <0x0 0x30000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@30000 {
 101                                 label = "u-boot-env";
 102                                 reg = <0x30000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         factory: partition@40000 {
 107                                 compatible = "nvmem-cells";
 108                                 label = "factory";
 109                                 reg = <0x40000 0x10000>;
 110                                 #address-cells = <1>;
 111                                 #size-cells = <1>;
 112                                 read-only;
 113
 114                                 eeprom_factory_0: eeprom@0 {
 115                                         reg = <0x0 0x400>;
 116                                 };
 117
 118                                 macaddr_factory_e000: macaddr@e000 {
 119                                         reg = <0xe000 0x6>;
 120                                 };
 121
 122                                 macaddr_factory_e006: macaddr@e006 {
 123                                         reg = <0xe006 0x6>;
 124                                 };
 125                         };
 126
 127                         partition@50000 {
 128                                 compatible = "denx,uimage";
 129                                 label = "firmware";
 130                                 reg = <0x50000 0x1fb0000>;
 131                         };
 132                 };
 133         };
 134 };
 135
 136 &pcie {
 137         status = "okay";
 138 };
 139
 140 &pcie0 {
 141         mt76@0,0 {
 142                 reg = <0x0000 0 0 0 0>;
 143                 mediatek,mtd-eeprom = <&factory 0x8000>;
 144                 ieee80211-freq-limit = <5000000 6000000>;
 145         };
 146 };
 147
 148 &pcie1 {
 149         mt76@0,0 {
 150                 reg = <0x0000 0 0 0 0>;
 151                 nvmem-cells = <&eeprom_factory_0>;
 152                 nvmem-cell-names = "eeprom";
 153         };
 154 };
 155
 156 &gmac0 {
 157         nvmem-cells = <&macaddr_factory_e000>;
 158         nvmem-cell-names = "mac-address";
 159 };
 160
 161 &gmac1 {
 162         status = "okay";
 163         label = "wan";
 164         phy-handle = <&ethphy4>;
 165
 166         nvmem-cells = <&macaddr_factory_e006>;
 167         nvmem-cell-names = "mac-address";
 168 };
 169
 170 &mdio {
 171         ethphy4: ethernet-phy@4 {
 172                 reg = <4>;
 173         };
 174 };
 175
 176 &switch0 {
 177         ports {
 178                 port@1 {
 179                         status = "okay";
 180                         label = "lan2";
 181                 };
 182
 183                 port@2 {
 184                         status = "okay";
 185                         label = "lan1";
 186                 };
 187         };
 188 };
 189
 190 &state_default {
 191         gpio {
 192                 groups = "jtag", "uart2", "wdt";
 193                 function = "gpio";
 194         };
 195 };