3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "linksys,re6500", "mediatek,mt7621-soc";
8 model = "Linksys RE6500";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-leds";
21 label = "re6500:orange:wifi";
22 gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
26 label = "re6500:white:power";
27 gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
32 compatible = "gpio-keys";
36 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_WPS_BUTTON>;
42 gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
43 linux,code = <KEY_RESTART>;
52 compatible = "jedec,spi-nor";
54 spi-max-frequency = <10000000>;
57 compatible = "fixed-partitions";
69 reg = <0x30000 0x10000>;
73 factory: partition@40000 {
75 reg = <0x40000 0x10000>;
80 compatible = "denx,uimage";
82 reg = <0x50000 0x7b0000>;
90 groups = "i2c", "uart2";
101 reg = <0x0000 0 0 0 0>;
102 mediatek,mtd-eeprom = <&factory 0x0000>;
103 ieee80211-freq-limit = <5000000 6000000>;
109 reg = <0x0000 0 0 0 0>;
110 mediatek,mtd-eeprom = <&factory 0x8000>;
111 ieee80211-freq-limit = <2400000 2500000>;
116 mtd-mac-address = <&factory 0x2e>;