target/linux/ramips/dts/mt7621_netgear_eax12.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,eax12", "mediatek,mt7621-soc";
  10         model = "Netgear EAX12";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_red;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_red;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25
  26                 reset {
  27                         label = "reset";
  28                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  29                         linux,code = <KEY_RESTART>;
  30                 };
  31
  32                 wps {
  33                         label = "wps";
  34                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                 };
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41
  42                 led_power_green: power_green {
  43                         label = "green:power";
  44                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 led_power_red: power_red {
  48                         label = "red:power";
  49                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 client_green {
  53                         label = "green:client";
  54                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 client_red {
  58                         label = "red:client";
  59                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 router_green {
  63                         label = "green:router";
  64                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  65                 };
  66
  67                 router_red {
  68                         label = "red:router";
  69                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  70                 };
  71
  72                 wps_green {
  73                         label = "green:wps";
  74                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  75                 };
  76
  77                 eth_green {
  78                         label = "green:eth";
  79                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  80                 };
  81
  82                 eth_yellow {
  83                         label = "yellow:eth";
  84                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  85                 };
  86         };
  87 };
  88
  89 &nand {
  90         status = "okay";
  91
  92         partitions {
  93                 compatible = "fixed-partitions";
  94                 #address-cells = <1>;
  95                 #size-cells = <1>;
  96
  97                 partition@0 {
  98                         label = "Bootloader";
  99                         reg = <0x0 0x80000>;
 100                         read-only;
 101                 };
 102
 103                 partition@80000 {
 104                         label = "Config";
 105                         reg = <0x80000 0x80000>;
 106                         read-only;
 107                 };
 108
 109                 factory: partition@100000 {
 110                         label = "Factory";
 111                         reg = <0x100000 0x80000>;
 112                         read-only;
 113
 114                         nvmem-layout {
 115                                 compatible = "fixed-layout";
 116                                 #address-cells = <1>;
 117                                 #size-cells = <1>;
 118
 119                                 eeprom_factory_0: eeprom@0 {
 120                                         reg = <0x0 0xe00>;
 121                                 };
 122
 123                                 precal_factory_e10: precal@e10 {
 124                                         reg = <0xe10 0x19c10>;
 125                                 };
 126                         };
 127                 };
 128
 129                 partition@180000 {
 130                         label = "firmware";
 131                         reg = <0x180000 0x3800000>;
 132
 133                         compatible = "fixed-partitions";
 134                         #address-cells = <1>;
 135                         #size-cells = <1>;
 136
 137                         partition@0 {
 138                                 label = "kernel";
 139                                 reg = <0x0 0x400000>;
 140                         };
 141
 142                         partition@400000 {
 143                                 label = "ubi";
 144                                 reg = <0x400000 0x3400000>;
 145                         };
 146                 };
 147
 148                 partition@2780000 {
 149                         label = "firmware_backup";
 150                         reg = <0x3980000 0x3800000>;
 151                         read-only;
 152                 };
 153
 154                 partition@4d80000 {
 155                         label = "CFG";
 156                         reg = <0x7180000 0x200000>;
 157                         read-only;
 158                 };
 159
 160                 partition@5580000 {
 161                         label = "RAE";
 162                         reg = <0x7380000 0x600000>;
 163                         read-only;
 164                 };
 165
 166                 partition@5980000 {
 167                         label = "POT";
 168                         reg = <0x7980000 0x020000>;
 169                         read-only;
 170                 };
 171
 172                 partition@6780000 {
 173                         label = "LOG";
 174                         reg = <0x79A0000 0x40000>;
 175                         read-only;
 176                 };
 177         };
 178 };
 179
 180 &pcie {
 181         status = "okay";
 182 };
 183
 184 &pcie1 {
 185         wifi@0,0 {
 186                 compatible = "mediatek,mt76";
 187                 reg = <0x0000 0 0 0 0>;
 188                 nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>;
 189                 nvmem-cell-names = "eeprom", "precal";
 190         };
 191 };
 192
 193 &switch0 {
 194         ports {
 195                 port@0 {
 196                         status = "okay";
 197                         label = "lan";
 198                 };
 199         };
 200 };
 201
 202 &xhci {
 203         status = "disabled";
 204 };