1 // SPDX-License-Identifier: GPL-2.0
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
10 compatible = "mediatek,mt7621-soc";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 label-mac-device = ðernet;
21 bootargs = "console=ttyS0,57600";
25 compatible = "gpio-leds";
28 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
32 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
33 trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
34 linux,default-trigger = "usbport";
37 led_internet: internet {
38 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
42 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
43 linux,default-trigger = "phy0tpt";
47 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
52 compatible = "gpio-keys-polled";
57 gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
58 linux,code = <KEY_WPS_BUTTON>;
63 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
64 linux,code = <KEY_RFKILL>;
69 gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
70 linux,code = <KEY_RESTART>;
74 reg_usb_vbus: regulator {
75 compatible = "regulator-fixed";
76 regulator-name = "usb_vbus";
77 regulator-min-microvolt = <5000000>;
78 regulator-max-microvolt = <5000000>;
79 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
85 vbus-supply = <®_usb_vbus>;
94 compatible = "pci14c3,7662";
95 reg = <0x0000 0 0 0 0>;
96 mediatek,mtd-eeprom = <&factory 0x8000>;
97 ieee80211-freq-limit = <5000000 6000000>;
103 compatible = "pci14c3,7603";
104 reg = <0x0000 0 0 0 0>;
105 mediatek,mtd-eeprom = <&factory 0x0000>;
106 ieee80211-freq-limit = <2400000 2500000>;
111 mtd-mac-address = <&factory 0x4>;
115 state_default: pinctrl0 {
117 ralink,group = "uart3", "uart2", "jtag", "wdt";
118 ralink,function = "gpio";