3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/leds/common.h>
8 compatible = "storylink,sap-g3200u3", "mediatek,mt7621-soc";
9 model = "STORYLiNK SAP-G3200U3";
12 compatible = "gpio-leds";
15 function = LED_FUNCTION_USB;
16 color = <LED_COLOR_ID_GREEN>;
17 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
18 trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
19 linux,default-trigger = "usbport";
24 compatible = "gpio-keys";
28 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RESTART>;
34 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_RFKILL>;
44 compatible = "jedec,spi-nor";
46 spi-max-frequency = <10000000>;
49 compatible = "fixed-partitions";
61 reg = <0x30000 0x1000>;
67 reg = <0x31000 0xf000>;
71 factory: partition@40000 {
73 reg = <0x40000 0x10000>;
77 compatible = "fixed-layout";
81 eeprom_factory_0: eeprom@0 {
85 eeprom_factory_8000: eeprom@8000 {
89 macaddr_factory_e006: macaddr@e006 {
90 compatible = "mac-base";
92 #nvmem-cell-cells = <1>;
98 compatible = "denx,uimage";
100 reg = <0x50000 0x7b0000>;
112 reg = <0x0000 0 0 0 0>;
113 nvmem-cells = <&eeprom_factory_8000>;
114 nvmem-cell-names = "eeprom";
115 ieee80211-freq-limit = <5000000 6000000>;
121 reg = <0x0000 0 0 0 0>;
122 nvmem-cells = <&eeprom_factory_0>;
123 nvmem-cell-names = "eeprom";
124 ieee80211-freq-limit = <2400000 2500000>;
129 nvmem-cells = <&macaddr_factory_e006 0>;
130 nvmem-cell-names = "mac-address";
136 phy-handle = <ðphy4>;
138 nvmem-cells = <&macaddr_factory_e006 1>;
139 nvmem-cell-names = "mac-address";
143 ethphy4: ethernet-phy@4 {
174 groups = "uart3", "jtag";