3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
8 label-mac-device = &gmac0;
12 bootargs = "console=ttyS0,57600";
16 compatible = "gpio-keys";
20 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
21 linux,code = <KEY_RESTART>;
27 mtd-mac-address = <&factory 0x22>;
35 mtd-mac-address = <&factory 0x22>;
36 mtd-mac-address-increment = <1>;
65 compatible = "fixed-partitions";
77 reg = <0x80000 0x60000>;
81 factory: partition@e0000 {
83 reg = <0xe0000 0x60000>;
88 reg = <0x140000 0x300000>;
93 reg = <0x440000 0x300000>;
98 reg = <0x740000 0xf7c0000>;
105 groups = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
112 * This board has 2Mb spi flash soldered in and visible
113 * from manufacturer's firmware.
114 * But this SoC shares spi and nand pins,
115 * and current driver doesn't handle this sharing well
120 compatible = "jedec,spi-nor";
122 spi-max-frequency = <10000000>;
125 compatible = "fixed-partitions";
126 #address-cells = <1>;
131 reg = <0x0 0x200000>;