3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
8 label-mac-device = &gmac0;
12 bootargs = "console=ttyS0,57600";
16 compatible = "gpio-keys";
20 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
21 linux,code = <KEY_RESTART>;
27 mtd-mac-address = <&factory 0x22>;
41 mtd-mac-address = <&factory 0x22>;
42 mtd-mac-address-increment = <1>;
48 mtd-mac-address = <&factory 0x22>;
49 mtd-mac-address-increment = <2>;
55 mtd-mac-address = <&factory 0x22>;
56 mtd-mac-address-increment = <3>;
62 mtd-mac-address = <&factory 0x22>;
63 mtd-mac-address-increment = <4>;
72 compatible = "fixed-partitions";
84 reg = <0x80000 0x60000>;
88 factory: partition@e0000 {
90 reg = <0xe0000 0x60000>;
95 reg = <0x140000 0x300000>;
100 reg = <0x440000 0x300000>;
105 reg = <0x740000 0xf7c0000>;
112 groups = "uart2", "uart3", "pcie", "rgmii2", "jtag";
119 * This board has 2Mb spi flash soldered in and visible
120 * from manufacturer's firmware.
121 * But this SoC shares spi and nand pins,
122 * and current driver doesn't handle this sharing well
127 compatible = "jedec,spi-nor";
129 spi-max-frequency = <10000000>;
132 compatible = "fixed-partitions";
133 #address-cells = <1>;
138 reg = <0x0 0x200000>;