3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
8 label-mac-device = &gmac0;
12 compatible = "gpio-keys";
16 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
17 linux,code = <KEY_RESTART>;
23 mtd-mac-address = <&factory 0x22>;
37 mtd-mac-address = <&factory 0x22>;
38 mac-address-increment = <1>;
44 mtd-mac-address = <&factory 0x22>;
45 mac-address-increment = <2>;
51 mtd-mac-address = <&factory 0x22>;
52 mac-address-increment = <3>;
58 mtd-mac-address = <&factory 0x22>;
59 mac-address-increment = <4>;
68 compatible = "fixed-partitions";
80 reg = <0x80000 0x60000>;
84 factory: partition@e0000 {
86 reg = <0xe0000 0x60000>;
91 reg = <0x140000 0x300000>;
96 reg = <0x440000 0x300000>;
101 reg = <0x740000 0xf7c0000>;
108 groups = "uart2", "uart3", "pcie", "rgmii2", "jtag";
115 * This board has 2Mb spi flash soldered in and visible
116 * from manufacturer's firmware.
117 * But this SoC shares spi and nand pins,
118 * and current driver doesn't handle this sharing well
123 compatible = "jedec,spi-nor";
125 spi-max-frequency = <10000000>;
128 compatible = "fixed-partitions";
129 #address-cells = <1>;
134 reg = <0x0 0x200000>;