ramips: convert MT7603 EEPROM to NVMEM format
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / mt7621_winstars_ws-wn583a6.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "winstars,ws-wn583a6", "mediatek,mt7621-soc";
10 model = "Winstars WS-WN583A6";
11
12 aliases {
13 led-boot = &led_status_red;
14 led-failsafe = &led_status_red;
15 led-running = &led_status_blue;
16 led-upgrade = &led_status_red;
17 };
18
19 leds {
20 compatible = "gpio-leds";
21
22 night_light_white {
23 label = "white:night_light";
24 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
25 };
26
27 led_status_blue: status_blue {
28 label = "blue:status";
29 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
30 };
31
32 status_amber {
33 label = "amber:status";
34 gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
35 };
36
37 led_status_red: status_red {
38 label = "red:status";
39 gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
40 };
41 };
42
43 keys {
44 compatible = "gpio-keys";
45
46 reset {
47 label = "reset";
48 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
50 };
51
52 wps {
53 label = "wps";
54 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_WPS_BUTTON>;
56 };
57 };
58 };
59
60 &spi0 {
61 status = "okay";
62
63 flash@0 {
64 compatible = "jedec,spi-nor";
65 reg = <0>;
66 spi-max-frequency = <104000000>;
67 m25p,fast-read;
68
69 partitions {
70 compatible = "fixed-partitions";
71 #address-cells = <1>;
72 #size-cells = <1>;
73
74 partition@0 {
75 label = "bootloader";
76 reg = <0x0 0x30000>;
77 read-only;
78 };
79
80 partition@30000 {
81 label = "config";
82 reg = <0x30000 0x10000>;
83 read-only;
84 };
85
86 factory: partition@40000 {
87 compatible = "nvmem-cells";
88 label = "factory";
89 reg = <0x40000 0x10000>;
90 #address-cells = <1>;
91 #size-cells = <1>;
92 read-only;
93
94 eeprom_factory_0: eeprom@0 {
95 reg = <0x0 0x400>;
96 };
97
98 macaddr_factory_e000: macaddr@e000 {
99 reg = <0xe000 0x6>;
100 };
101
102 macaddr_factory_e006: macaddr@e006 {
103 reg = <0xe006 0x6>;
104 };
105 };
106
107 partition@50000 {
108 compatible = "denx,uimage";
109 label = "firmware";
110 reg = <0x50000 0x7b0000>;
111 };
112 };
113 };
114 };
115
116 &pcie {
117 status = "okay";
118 };
119
120 &pcie0 {
121 wifi@0,0 {
122 compatible = "mediatek,mt76";
123 reg = <0x0000 0 0 0 0>;
124 nvmem-cells = <&eeprom_factory_0>;
125 nvmem-cell-names = "eeprom";
126 };
127 };
128
129 &pcie1 {
130 wifi@0,0 {
131 compatible = "mediatek,mt76";
132 reg = <0x0000 0 0 0 0>;
133 mediatek,mtd-eeprom = <&factory 0x8000>;
134 };
135 };
136
137 &ethernet {
138 pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
139 };
140
141 &gmac0 {
142 nvmem-cells = <&macaddr_factory_e000>;
143 nvmem-cell-names = "mac-address";
144 };
145
146 &switch0 {
147 ports {
148 port@0 {
149 status = "okay";
150 label = "wan";
151 nvmem-cells = <&macaddr_factory_e006>;
152 nvmem-cell-names = "mac-address";
153 };
154
155 port@1 {
156 status = "okay";
157 label = "lan";
158 };
159 };
160 };
161
162 &state_default {
163 gpio {
164 groups = "jtag", "wdt", "rgmii2";
165 function = "gpio";
166 };
167 };
168
169 &xhci {
170 status = "disabled";
171 };