3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
10 led-boot = &led_status;
11 led-failsafe = &led_status;
12 led-running = &led_status;
13 led-upgrade = &led_status;
14 label-mac-device = &wifi0;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-keys";
26 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
27 linux,code = <KEY_RESTART>;
32 compatible = "gpio-leds";
35 label = "zbt-wg3526:green:status";
36 gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
53 compatible = "jedec,spi-nor";
55 spi-max-frequency = <10000000>;
58 compatible = "fixed-partitions";
70 reg = <0x30000 0x10000>;
74 factory: partition@40000 {
76 reg = <0x40000 0x10000>;
80 firmware: partition@50000 {
81 compatible = "denx,uimage";
94 compatible = "pci14c3,7603";
95 reg = <0x0000 0 0 0 0>;
96 mediatek,mtd-eeprom = <&factory 0x0000>;
102 compatible = "pci14c3,7662";
103 reg = <0x0000 0 0 0 0>;
104 mediatek,mtd-eeprom = <&factory 0x8000>;
105 ieee80211-freq-limit = <5000000 6000000>;
114 mtd-mac-address = <&factory 0xe000>;
142 mtd-mac-address = <&factory 0xe000>;
143 mtd-mac-address-increment = <1>;
150 groups = "wdt", "rgmii2";