target/linux/ramips/dts/mt7628an_buffalo_wcr-1166ds.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
  10         model = "Buffalo WCR-1166DS";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys";
  21
  22                 aoss {
  23                         label = "aoss";
  24                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                 };
  27
  28                 ap {
  29                         label = "ap";
  30                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  31                         linux,code = <BTN_0>;
  32                         linux,input-type = <EV_SW>;
  33                 };
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 router_o {
  46                         label = "wcr-1166ds:orange:router";
  47                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 router_g {
  51                         label = "wcr-1166ds:green:router";
  52                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 internet_o {
  56                         label = "wcr-1166ds:orange:internet";
  57                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 internet_g {
  61                         label = "wcr-1166ds:green:internet";
  62                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wireless_o {
  66                         label = "wcr-1166ds:orange:wireless";
  67                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 wireless_g {
  71                         label = "wcr-1166ds:green:wireless";
  72                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 diag {
  76                         label = "wcr-1166ds:orange:diag";
  77                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 led_power: power {
  81                         label = "wcr-1166ds:green:power";
  82                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85 };
  86
  87 &ehci {
  88         status = "disabled";
  89 };
  90
  91 &esw {
  92         mediatek,portmap = <0x2f>;
  93         mediatek,portdisable = <0x27>;
  94 };
  95
  96 &ohci {
  97         status = "disabled";
  98 };
  99
 100 &pcie {
 101         status = "okay";
 102 };
 103
 104 &pcie0 {
 105         mt76@0,0 {
 106                 reg = <0x0000 0 0 0 0>;
 107                 mediatek,mtd-eeprom = <&factory 0x8000>;
 108                 ieee80211-freq-limit = <5000000 6000000>;
 109         };
 110 };
 111
 112 &pinctrl {
 113         state_default: pinctrl0 {
 114                 gpio {
 115                         ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
 116                         ralink,function = "gpio";
 117                 };
 118         };
 119 };
 120
 121 &spi0 {
 122         status = "okay";
 123
 124         m25p80@0 {
 125                 compatible = "jedec,spi-nor";
 126                 reg = <0>;
 127                 spi-max-frequency = <10000000>;
 128
 129                 partitions {
 130                         compatible = "fixed-partitions";
 131                         #address-cells = <1>;
 132                         #size-cells = <1>;
 133
 134                         partition@0 {
 135                                 label = "u-boot";
 136                                 reg = <0x0 0x30000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@30000 {
 141                                 label = "u-boot-env";
 142                                 reg = <0x30000 0x10000>;
 143                                 read-only;
 144                         };
 145
 146                         factory: partition@40000 {
 147                                 label = "factory";
 148                                 reg = <0x40000 0x10000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@50000 {
 153                                 compatible = "openwrt,trx";
 154                                 label = "firmware";
 155                                 reg = <0x50000 0x7c0000>;
 156                         };
 157
 158                         partition@810000 {
 159                                 label = "firmware2";
 160                                 reg = <0x810000 0x7c0000>;
 161                         };
 162
 163                         partition@fd0000 {
 164                                 label = "glbcfg";
 165                                 reg = <0xfd0000 0x10000>;
 166                                 read-only;
 167                         };
 168
 169                         partition@fe0000 {
 170                                 label = "board_data";
 171                                 reg = <0xfe0000 0x10000>;
 172                                 read-only;
 173                         };
 174                 };
 175         };
 176 };
 177
 178 &wmac {
 179         status = "okay";
 180 };