3 #include "mt7628an.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 bootargs = "console=ttyS0,115200";
28 compatible = "gpio-leds";
31 label = "pbr-d1:orange:usb";
32 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
33 trigger-sources = <&ohci_port1>, <&ehci_port1>;
34 linux,default-trigger = "usbport";
38 label = "pbr-d1:orange:power";
39 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
45 compatible = "gpio-keys";
49 gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
55 compatible = "mediatek,gpio-wifi";
64 state_default: pinctrl0 {
66 ralink,group = "gpio";
67 ralink,function = "gpio";
72 ralink,function = "gpio";
77 ralink,function = "gpio";
81 ralink,group = "spis";
82 ralink,function = "gpio";
87 ralink,function = "gpio";
95 pinctrl-names = "default";
96 pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
99 compatible = "jedec,spi-nor";
101 spi-max-frequency = <40000000>;
104 compatible = "fixed-partitions";
105 #address-cells = <1>;
115 label = "u-boot-env";
116 reg = <0x30000 0x10000>;
119 factory: partition@40000 {
121 reg = <0x40000 0x10000>;
126 compatible = "denx,uimage";
128 reg = <0x50000 0x0fb0000>;
134 #address-cells = <1>;
136 compatible = "linux,spidev";
138 spi-max-frequency = <40000000>;
159 mtd-mac-address = <&factory 0x28>;