3 #include "mt7628an.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
10 model = "Mercury MAC1200R v2";
13 led-boot = &led_status;
14 led-failsafe = &led_status;
15 led-running = &led_status;
16 led-upgrade = &led_status;
20 compatible = "gpio-leds";
23 label = "mac1200rv2:green:status";
24 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
33 compatible = "jedec,spi-nor";
35 spi-max-frequency = <10000000>;
38 compatible = "fixed-partitions";
47 factory: partition@1d800 {
48 label = "factory_info";
49 reg = <0x1d800 0x800>;
53 art: partition@1e000 {
55 reg = <0x1e000 0x2000>;
61 reg = <0x20000 0x10000>;
66 reg = <0x30000 0x10000>;
70 compatible = "denx,uimage";
72 reg = <0x40000 0x7c0000>;
79 pinctrl-names = "default";
80 mtd-mac-address = <&factory 0xd>;
84 mediatek,portmap = <0x2f>;
89 ralink,mtd-eeprom = <&art 0x0>;
98 reg = <0x0000 0 0 0 0>;
99 mediatek,mtd-eeprom = <&art 0x1000>;
100 ieee80211-freq-limit = <5000000 6000000>;