1 #include "mt7628an_tplink_8m.dtsi"
4 compatible = "tplink,archer-c50-v3", "mediatek,mt7628an-soc";
5 model = "TP-Link Archer C50 v3";
9 led-failsafe = &led_power;
10 led-running = &led_power;
11 led-upgrade = &led_power;
15 compatible = "gpio-keys";
19 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
20 linux,code = <KEY_RESTART>;
25 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RFKILL>;
31 compatible = "gpio-leds";
34 label = "archer-c50-v3:green:lan";
35 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
39 label = "archer-c50-v3:green:power";
40 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
44 label = "archer-c50-v3:green:wan";
45 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
49 label = "archer-c50-v3:orange:wan";
50 gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
54 label = "archer-c50-v3:green:wlan2g";
55 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
59 label = "archer-c50-v3:green:wlan5g";
60 gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
64 label = "archer-c50-v3:green:wps";
65 gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
72 groups = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
73 "p3led_an", "p4led_an", "wdt", "wled_an";
79 mediatek,portmap = <0x3e>;
88 reg = <0x0000 0 0 0 0>;
89 mediatek,mtd-eeprom = <&factory 0x28000>;
90 ieee80211-freq-limit = <5000000 6000000>;
91 mtd-mac-address = <&factory 0xf100>;
92 mtd-mac-address-increment = <(-1)>;